Jump to content


  4. →
  5. →
  6. → Article: Another rear window pattern tip.

- - - - -     
Oct 20 2004 03:10 AM | BIG E in Featured Articles 10

Another rear window pattern tip.

Did a search and found nothing so i hope this was not covered before! I use fine line masking tape to outline the matrix when cutting out rear windows with dark film and cars with dark interiors. Then wet the film, lay and cut the film along the masking tape. Quick and very easy. :lol




5 Comments


krazykasper11
Oct 20 2004 04:03 PM
very interesting tip don't know if you tape the inside or the out, I'm assumeing out
however, masking tape doesn't strech around curves very well. I think stripeing tape might work better ill try it with that,,,,,, that's if I can ever get a car in here to tint! talk about dead :coffee

Mr paladin
Oct 20 2004 04:10 PM
I have used pinsrtiping tape to trim around brake lights before :coffee

krazykasper11
Oct 20 2004 04:43 PM
not me, I just stick an old tint tube between the brake and the seat and start cutting :coffee

BIG E
Oct 20 2004 07:28 PM
Put it on the outside, and the fine line 1/4" wide or 1/8" wide makes the tight corners easily! :krazy

asistint
Oct 28 2004 05:58 PM
I'm assuming you have allready tried laying a flouresent light on the rear deck, putting more light inside the vehicle. If not try that I do it on every car.

Good luck