Here's a little info for the panel pullers. This one sux cuz the gaskets are one piece all the way around the window (I've seen this on the older LS430 Lex which is even worse cuz the gasket is riveted in, 06ish I think it was).
The back part of the gasket is barely atatched to the rest of the gasket by a tiny piece so I cut it and just let it hang over.
This is for the back door removal. Fronts are the same with the exception of an extra torx & the tweeter.
Here's the front door gasket.
After I put the gasket back in-
35% all around-
Edited by GSRBOB, April 17 2013 - 12:30 PM.