TintDude Window Tinting Logo

      Welcome Guest ( Log In | Join )

cleaning the rear glass






 
Reply to this topicStart new topic
> cleaning the rear glass, totw
ClassOnGlass
Comment Oct 26 2008, 08:50 AM
  #1





i had added a new step to cleaning my rear glass with great results...
1 st thing i do is wet down the glass
2nd thing i do is scrub it down with a dobie or a white scrub pad
3rd thing is to take you clear slammer and squeegee it from middle to left accross the glass do the left side from top to bottom the repeat from middle to right top to bottom it will take off any burs tape or stubborn dirt...
4th is to remist and squeegee down with blue or clear max it works great ilove the new addition
try it and post your results big joe
Go to the top of the page
 
+Quote Post
TintDude
Comment Oct 26 2008, 10:43 AM
  #2





I do the same thing except I also wipe the rubber or trim down right before squeegeeing.

What were you doing before?

beer.gif
Go to the top of the page
 
+Quote Post
thatsnappyguy
Comment Oct 26 2008, 11:10 AM
  #3





sounds like a great idea. i dont even need to try this without knowing that it will work. its something that im going try and maybe add to the procedure. thanks joe.

somthing i usually do also to add to the clean job..

i keep the zep concentrate glass cleaner in the shop at all times for cleaning the glasses after the job is done. what i usually do b4 i clean the back window is saturate the rear glass with this diluted cleaner and let it sit for a few minutes. after it sits for a lil while, then i proceed with normal cleaning. i do this whether the car is new or not. to me it couldnt hurt, it can only help..thats why i do it.
Go to the top of the page
 
+Quote Post
maddtinter
Comment Oct 26 2008, 01:22 PM
  #4





I recently started using Meguiar's concentrated cleaner.10:1 ratio misted on the glass,let it sit for a couple of minutes then spray with dirt off and scrub away.Seems to work really well on b/g that hasn"t been cleaned that often.

This has been edited by maddtinter: Oct 26 2008, 01:22 PM
Go to the top of the page
 
+Quote Post
ClassOnGlass
Comment Oct 26 2008, 02:45 PM
  #5





QUOTE (TintDude @ Oct 26 2008, 12:43 PM) [*]649910[/*]
I do the same thing except I also wipe the rubber or trim down right before squeegeeing.

What were you doing before?

beer.gif

all the same i just added the clear slammer into the mix i use short pushes so from the middle to the end is about five pushes back and forth all the way down works mint

This has been edited by ClassOnGlass: Oct 26 2008, 02:46 PM
Go to the top of the page
 
+Quote Post
rondy_
Comment Oct 26 2008, 10:34 PM
  #6





I do the same except for the 4th step, Im going to try it.

I get good results anyway smile22.gif.
Go to the top of the page
 
+Quote Post
ClassOnGlass
Comment Oct 29 2008, 05:49 PM
  #7





any one try this yet how do they like the results ????
Go to the top of the page
 
+Quote Post
thatsnappyguy
Comment Oct 29 2008, 08:28 PM
  #8





i forgot to do it, i l try tomorrow if i remember.
Go to the top of the page
 
+Quote Post
thatsnappyguy
Comment Oct 30 2008, 11:18 AM
  #9





just did this on a chrystler 300 and it seems like it was the cleanest back glass ever. this is a very good tip, possibly the best tip this year other than the tintzues's dry shinking method with just wiping off the slip. very good to e a part of this web site
Go to the top of the page
 
+Quote Post
rondy_
Comment Oct 30 2008, 01:45 PM
  #10





on the 4th step do you squeegee just on the center or the whole window?
Go to the top of the page
 
+Quote Post
ClassOnGlass
Comment Oct 30 2008, 02:48 PM
  #11





QUOTE (rondy_ @ Oct 30 2008, 03:45 PM) [*]650700[/*]
on the 4th step do you squeegee just on the center or the whole window?

THE WHOLE GLASS thumb.gif
Go to the top of the page
 
+Quote Post
ClassOnGlass
Comment Oct 30 2008, 02:50 PM
  #12





QUOTE (thatsnappyguy @ Oct 30 2008, 01:18 PM) [*]650675[/*]
just did this on a chrystler 300 and it seems like it was the cleanest back glass ever. this is a very good tip, possibly the best tip this year other than the tintzues's dry shinking method with just wiping off the slip. very good to e a part of this web site

MY THOUGHT WAS THE SAME WHEN I FIRST DID IT SO ITS IN MY NORMAL PROCEDURE NOW thumb.gif thumb.gif thumb.gif
Go to the top of the page
 
+Quote Post
Tint Artist
Comment Oct 30 2008, 05:23 PM
  #13





That's a great technique for cleaning! Instead of a slammer i've been using a red devil,but i think i'll try the ole slammer tomorrow. Seems you can get better leverage with it1 bottle.gif biggthumpup.gif
Go to the top of the page
 
+Quote Post
ClassOnGlass
Comment Oct 30 2008, 09:59 PM
  #14





sure you will get 10 times more with the slammer
Go to the top of the page
 
+Quote Post
Tint Artist
Comment Nov 3 2008, 06:46 AM
  #15





Just wanted to let you know that i tried your cleaning technique using a slammer and had great results!! I always had good results w/using a red devil, but i definitly got better leverage using a slammer! thanx class on glass!! beer.gif
Go to the top of the page
 
+Quote Post
ClassOnGlass
Comment Nov 3 2008, 06:59 AM
  #16





no problem dude be sure to vote for the tip of the week happy tinting dude
http://www.tintdude.com/forum/index.php?sh...c=49074&hl=

This has been edited by ClassOnGlass: Nov 3 2008, 07:00 AM
Go to the top of the page
 
+Quote Post
Tint Artist
Comment Nov 3 2008, 08:08 AM
  #17





thumb.gif gotcha brother
Go to the top of the page
 
+Quote Post
maddtinter
Comment Nov 3 2008, 08:54 AM
  #18





QUOTE (Tint Artist @ Nov 3 2008, 05:46 AM) [*]651210[/*]
Just wanted to let you know that i tried your cleaning technique using a slammer and had great results!! I always had good results w/using a red devil, but i definitly got better leverage using a slammer! thanx class on glass!! beer.gif
Becareful not to scratch the glass.I know it sounds strange but anytime you take a hard object to th glass there is a possibility to scratch the glass even if it is plastic.
Go to the top of the page
 
+Quote Post
Tint Artist
Comment Nov 3 2008, 09:36 AM
  #19





thumb.gif Yea i'm sure your right especially if it's a car with soft glass, but i like the idea but being careful in this trade is something that we all need to be! And trial and error (aka. Experience) is are best teacher!
Go to the top of the page
 
+Quote Post
vwvanner
Comment Nov 3 2008, 04:44 PM
  #20





Please could someone post pics of these tools you all refer to,would help across the pond with the terminology differences.
Thanks
Go to the top of the page
 
+Quote Post
Kokomo Tint and ...
Comment Nov 14 2008, 01:04 PM
  #21





I ordered the slammer, but the blue or clear max will just have to wait. $40 for the blade and grip Fbigeyes.gif
Yea, I know i'm cheap.
Go to the top of the page
 
+Quote Post
ClassOnGlass
Comment Nov 15 2008, 11:39 PM
  #22





QUOTE (maddtinter @ Nov 3 2008, 10:54 AM) [*]651237[/*]
QUOTE (Tint Artist @ Nov 3 2008, 05:46 AM) [*]651210[/*]
Just wanted to let you know that i tried your cleaning technique using a slammer and had great results!! I always had good results w/using a red devil, but i definitly got better leverage using a slammer! thanx class on glass!! beer.gif
Becareful not to scratch the glass.I know it sounds strange but anytime you take a hard object to th glass there is a possibility to scratch the glass even if it is plastic.

use the clear slammer and not the hard yellow ones clear is soft !!!!!!
Go to the top of the page
 
+Quote Post
spacer


Reply to this topicStart new topic
Members reading this topic:

 



Lo-Fi Version Time is now: 20th November 2009 - 08:59 PM
© Copyright 1999-2009 TintDude.com Contact tintdude@gmail.com