Resurface your hard cards, without a tool Options

[TintJunkie]

I use hard cards a lot on automotive. I had the resurface tool, but i didn't like it. This is what i do to smooth out the edges. I use a piece of automotive carpet and rub the the card really fast on the edges of the card on the carpet. What it does is it gets the card hot and basically burns the card to make it smooth again. No more scratching film!!

Anyone else do this?

[Pit Stop]

I use my jeans

[TintDude]

Yup, I use the side of my shoe.

[thatsnappyguy]

i just use the customers floor board

[Tint Artist]

I use my Apron!

[ClassOnGlass]

and i wet sand them and then steel wool them with 0000 steel wool

[running free]

and i wet sand them and then steel wool them with 0000 steel wool

Same here

[maddtinter]

and i wet sand them and then steel wool them with 0000 steel wool

Mostly dry, sometimes wet.Either 400 or 600 grit.

[nc_wlch]

and i wet sand them and then steel wool them with 0000 steel wool

same here, i almost never have to buy tools anymore!

[Mdog]

I use the customers seats J/k

[tint_audiopros]

.....& I use the headliner


















jk

[tint_audiopros]

I really wet sand em' like class on , works great !

[760executivetint]

i use my fiances leg

[TINTZEUS]

I had the resurface tool, but i didn't like it.

I have one of thoes. I love it for the blue and clear max.


Nice tip..........

[SIR TINTSALOT]

I use a really fine sanding block, about once a week I touch em up

[GLASSPROTECT]

I just wonder why do you all try reusing a hardcard of USD 1,00 and taking a risk of scratching the film ???????????

You get US --- to install the film on the car ????????????????????????

[maddtinter]

Why not use a card that has been modified for installing.I can't remember the last time I grabbed a new card that didn't need some sort of tuning.Even if they do cost 1 peso there is still no need to toss 'em(unless they break in half).

[WearTheFoxHat]

I have a 4" Grey Lidco I have been using daily for about 4 years. I tune it with 800 grit sandpaper as needed. I think in a year or so I'll invest in a new one.

[trimguy]

A cardboard box for me.

[TintJunkie]

Anyone know how to resurface a yellow squegee?

[hoosierwindowtek]

I just wonder why do you all try reusing a hardcard of USD 1,00 and taking a risk of scratching the film ???????????

You get US --- to install the film on the car ????????????????????????

Well, since the cards often come with rough edges when new, it makes sense to learn to get a smooth edge before using for the first time and after they're old too.

[1PEECBARETTA]

Anyone know how to resurface a yellow squegee?

toss em

[exotic window ti...]

i have always had worked at car audio shops and they always carpet the work benches and thats always what i have used

[rondy_]

just tried this with a 2000 grit paper

it works awesome! great tip never thought about that

you can feel the smooth edge

This has been edited by rondy_: Nov 28 2008, 08:48 AM

[coolzone]

Why is the sharpening tool not liked? Does it leave a sharp edge that scratches or what is the main issue with that tool?

[rondy_]

Why is the sharpening tool not liked? Does it leave a sharp edge that scratches or what is the main issue with that tool?

I dont have the sharpening tool I already had the grit paper

[coolzone]

yeah I am just curious. I have the tool but have never had any issue with it but maybe someone has(maybe I have just been lucky). Mine was thrown in for free on an order of some tools once otherwise I would not have one either.

[metro jim]

When we did auto tinting we used to jack up car and have one guy inside reving the engine and with the wheels spinning you can grind down any card to perfection every time. Go ahead try it its fun!

[SeSimJae]

I use the newspaper!

[SeSimJae]

I use the newspaper!

[wetintcars.com]

I use my jeans

This one tip is the single most valuable one I have ever seen. I have gone through soooo many of those little white hard cards over the years. I would use the planer and they would always leave a "squared off" edge that would eventually render the card unusable after a few times - not to mention the card would get smaller and smaller as I used it.

I started just running the edge of the card across my jeans to take the fine cuts go away. And VOILA! It works! I have been tinting for 23 years now and if I had only come across this tip earlier I wouldn't have gone through so many cards. I hate ordering just for those stupid little cards!

Thanks for the tip!

[irishtinter]

one spot on my trousers is wrecked from rubbing off hahahahaha

Hope my wife doesnt read this, she think somethin else hahah

[robg]

400 grit for me.