2004 JAGUAR TYPE-S

the doors have rubber gaskets along the sides and the bottom seals are very soft and easily tucked. the backglass on the other hand is pretty curved, reminded me alot like shrinking the new style lincoln town car backglass, because of the amount of shrinking you have to do.

So.......easy to tint then? Looks nice Mdog!

doors are very easy but you definitely need to know how to shrink to get that backglass

It's all good....i've got ivory soap to lather up my azz for the reaming that back window will give me.

Not sure if you guys have noticed, but the lower rear deck is right up against the glass. What we have been doing on the dealer cars is essentially smashing the rear deck in on the corners when installing the film, this way you don't get any fibers in the film. Trying to just slide the film in there is a bit of a PITA, especially on a non-metallized film, the corners pop right back up so it's no biggie.

you can also pull those rubbers out instead of tucking it

i removed the whole back end to get to that tight spot on the rear deck and it was so easy to take out, took 20 mins to remove, all you need is t 40 pozy drive and it all pulls apart with ease, you may think its a long windid way around but i couldnt see any other way to get a nice clean install