My sister's 03 Eclipse

I wanna say theres alot of useful info on this board. I havent really posted much cause ive been reading throughout the board. Ive learned alot from reading the problem now is doing it in person.

Im a newbie but I love tinting, Ive done only front windows of some cars. They come out ok and all, still need to learn more though.




Well this is it, I was doing my sisters 03 Eclipse yesterday. I did the 2 front doors and the little rear ones. I made a pattern for the side windows with butcher paper and they came out great, exact match. There was a little contanination here and there(little dots) but nothing like "awwwwww". The little sides were easy, came out good.

As for the back, I wasnt really gonna put it on yet. I did a mold of the window to have it ready. I noticed alot of huge fingers on it. The rear window im gonna do it in 2 pieces since the tint i got is 20". Im using 20% on the rear window. For the fronts I used 30%. Since im new to this, i used the AutoZone tint. I did the Horizontal Anchor to see how many fingers will come out and there were plenty. Now all i need a a heat gun for this. I was looking at this Black and Decker Heat Gun.
I know I cannot master this in a few months, it takes years. What would u guys recommed to me for the back window.

i am afraid that car for a beinner will be tuff even in 2 pieces

HOLY SVIT are you in for a suprise the back window is a nightmare to get in 1 piece, even doing it in 2 pieces is going to be very hard if not impossible for somebody that has not heat formed tint before. you gotta start somewhere though

yup thats what ive been reading here. I went to the model and make of an Eclipse and someone said its hell.


My buddy who worked at a tint shop told me the same thing today, that its hard as hell. He offered himself but I declined cause I wanna learn to do these thing. But hes gonna help out a bit though. Its gonna take a while for me to learn but im very interested and wont give up.

Hey guys for the heat gun, what is the best temp to use for molding or shrinking the fingers. I know im not supposed to just let it heat the area for a long time cause it messes up the tint and stuff. For instance when heating it, its best to use a rolled up paper towel to prevent creases, and after all done use a hard card.





How was u all's expereince when u all started doing this. Did u all get all frustrated. I sure did knowing this is gonna be hard as hell.:(

I forgot to ask this. I got a 98 mustang that has old tint from 6 years ago, it was all limo. IM gonna take it off cause it turned purple and lots of bubbles on it. Im gonna use some 20% tint I got here.

Is a 98 Mustang hard as the 03 Eclipse. Since im new, I wanna give it a shot in 2 or 3 pieces.

How was u all's expereince when u all started doing this. Did u all get all frustrated. I sure did knowing this is gonna be hard as hell.:(

[/quote]
Yup

the mustng backglass is ALOT easier than the eclipse.

a regular cheap wagner or black and decker heatgun will work.

if you have a lowes around you can find the black milwaukee in the paint section. i think they are like 20 bucks or something.

oh hell yeah, welcome to window tinting

when you first start out its like that on every car you work on.

i always run my heatgun on high, you can controll the heat by how close you get the gun to the film, move it closer to the tint if you want hotter move it away for cooler, and i use cotton gloves on my hand so i can smooth the film down as i go. some people use hardcards and stuff like that though. you have to try it different ways and find which way is better for you.

read the fourms and go in your garage and keep trying. this is the only way to learn. I found that the really big garbage can with a lid set real close to the car is helpful. It keeps all of your f ups hidden.

thanx guys for the good advice:)

whoa, I had to double take on this post, I thought it read
"My sista's LipS"

It would be really nice to have better tint than that. Its gonna be easier with a different tint. The autozone tint, if you can get it to work, will turn purple in one summer. And for the footage, you can save a lot of money buying a big roll of it instead of buying a bunch of $15 six foot rolls. Would you buddy with the tint shop be so friendly to sell you a roll?

It might take 50 feet of learning just to get the mustang, then the eclipse...... who knows! Youre gonna stumble with it for a looooooong time. Good luck, I hope you dont get discouraged.

and, oh by the way, "AutoZone" tint isnt the easiest to work with....

I'm hoping you try the mustang first and like everone else said....Good Luck.....Dont let it get the best of you, take your time and BE NICE to the film.

im gonna ask him to hook me up with a roll this week. Yeah the autozone tint will turn purple and also has some little contamination. Not much contamination but a few dots here and there nothing big. Just for the practice i was doing i might take it off and put some other better tinit on it.

As for the tint i had i used to boxes with were about 20 bucks for both.

Yea working with sucks!

sorry i forgot to add on one of the above posts i made that the stang is already done. I got the side windows done at anothers friends shop. Its the rear window that has all the bubbles and purple tint. Thats the window i wanted to practice on.

Hey guys is there an edit option on this board where i can make corrections on posts.

the contamination isnt coming fromt he tint you are using, homes', its either from not using proper cleaning methods or the area your tinting in is dusty........ jmho

Edit privileges come at the 100 milepost...

Edit privileges come at the 100 milepost...

[/quote]

[quote=JUICE,Nov 10 2004, 03:52 PM]
Edit privileges come at the 100 milepost...

[/quote]







[/quote]


and so does typing class......... J/k

shizzzzzzz mang, dem NOOBIE_DOODS up in heah cant use dat message boardara fo shizznit mang. hittin all dem wrong buttons and shizzz

Fo schizzle my dumpster diving, tint scrap grabbin dizzle!