Escape

The back window sucks

Amen Amen Amen, Halleluia!!!! Praise the lord!

Brother TD is right on again up in dis here temple of tint.


You are right on the money TD. THEY BLOW!!!!

I totally agree. Obstacles galoore! I swore the last one I did would come back, but I was wrong.

you know its bad enough it has all the stuff to cut around, but then the damn film wants to come off the matrix also jeezus freaking christ i love tinting

Nothin better than gettin it all done, put it outside for an hour, go check it before they leave and the film its peeling back. Ahhh its great.

MDOG, tinting is the joy of my life.

typical mistake experience film falling off out in the sun i slather the hell out ot the matrix with a gluestick and the shiot still wants to come off.

Typical on all late model Fords.

YEAH THATS A FORD FOR YOU, DAMN AMERICAN MADE CRAP

Thank God.
I thought it was just me.

Having your caps lock on is not well-liked around here.

Sorry, guys, old thread. Didn't see the dates.

i was gonna say "way to bring up an old thread" but didnt want to be a smart-ass. at least you caught it

That's ok..he can see your post as a reminder when he comes back online...if I recall corectly..he never DID get the message

These can fall off the face of the earth and I wouldn't mind if I ever see another one. I was so pissed I took everything off the glass, then removed the glass. I was much happier after that, just having a piece of glass with nothing on it. It took 30 mins longer, but was worth it in my book. I'm glad I'm done with this thing.

I know this thread is old, but I wanted to give it a comeback.

a honda crv will be in your shop by monday

exp since 86 that back window is easy nuttin should suck for time uve been tinting everything should be easy for u

he didnt say it was hard....he said it sucked. no matter how long you have been tinting, or how much experience you have junior, some windows just suck.....plain and simple. You will learn that with time grasshopper.

I know i still cringe when certain cars come in, not because i can't do them, but because i know what it takes to get it done and the way i describe certain windows like that is "they SUCK!"

The bg does suck on those...I unfortunately own one (was my wifes...handed DOWN to me ). When I did mine...I pulled the glass out and removed ALL hardware. This is the only way to make the 01-07 bg look perfect. I still do em this way for custys...same goes for any extended cab windows on fords with the "buttons" them. I pull the glass.

how did u take all the buttons off??? i couldn't get em all out..

use a flat head to pop the spring clip up on the struts so you can take them off, then undo the two phillips screws holding the top hinges on. unclip the housing over the wiper, and disconnect the wire from the clip in spots all around the BG. then take it and put it on your table/bench etc. on the inside of the buttons, you'll see how they have two flat spots for a wrench/pliers. Figure out what size(i forget) and use your fingers to hold the outside, and slowly unbolt it from the inside. be careful putting it back in, not to over tighten and mess up the film. Do the BG first so it can dry while you do the rest.