Home | Forum | Lo-Fi Version | Site Map

lexus IS 300?

Custom Search

Full Version: lexus IS 300?

TintDude Forum > Main > Automotive - Makes and Models > Lexus

eastcoastfloyd

Jan 7 2005, 08:27 PM

well im doing one tommarow so any heads up on these?

Texastintchick

Jan 7 2005, 08:37 PM

Use steel wool 0000 on the defroster for the thick defroter lines. Can you say peanuts.

TINT

Jan 7 2005, 10:14 PM

peanuts

blade

Jan 9 2005, 09:09 AM

peanuts

GizzatTint

Aug 16 2005, 10:14 AM

i used 1000 grit sandpaper and did a wetsand on the back window and it turned out perfectly, no threads of the steel wool on the back window

TINTDEEZ

Aug 16 2005, 12:32 PM

QUOTE (GizzatTint @ Aug 16 2005, 10:14 AM)

i used 1000 grit sandpaper and did a wetsand on the back window and it turned out perfectly, no threads of the steel wool on the back window

[*]306736[/*]

das wus up!

Keepitreel

Mar 21 2007, 08:27 PM

I did one yesterday and after 3 tries I almost had it perfect, but too much heat so there was one line near one of the defroster line and the customer is coming back for a fourth run.So my question is the sand paper did not scratch the glass at all?

QUOTE (GizzatTint @ Aug 16 2005, 10:14 AM) [*]306736[/*]

i used 1000 grit sandpaper and did a wetsand on the back window and it turned out perfectly, no threads of the steel wool on the back window

Mr paladin

Mar 22 2007, 08:20 AM

QUOTE (GizzatTint @ Aug 16 2005, 11:14 AM) [*]306736[/*]

i used 1000 grit sandpaper and did a wetsand on the back window and it turned out perfectly, no threads of the steel wool on the back window

I WOULD NOT RECOMMEND THIS

Keepitreel

Mar 23 2007, 06:01 PM

Thanks, And one more thing about this Is300 it realley Sucks.

QUOTE (Mr paladin @ Mar 22 2007, 08:20 AM) [*]492326[/*]

I WOULD NOT RECOMMEND THIS

topdudetint

Mar 23 2007, 06:08 PM

the door panels make sure you put the tool rht were is the cilp so you dont crak the panel happens before

tint51

Mar 16 2009, 09:18 AM

QUOTE (Keepitreel @ Mar 21 2007, 08:27 PM) [*]492239[/*]

QUOTE (GizzatTint @ Aug 16 2005, 10:14 AM) [*]306736[/*]

i used 1000 grit sandpaper and did a wetsand on the back window and it turned out perfectly, no threads of the steel wool on the back window

I also am redoing one of these For the same reason so how is 00 Grade Steel wool on lines?

tint51

Mar 27 2009, 08:29 AM

So I am redoing a IS300 tomorrow because of Defrost lines...and dirty.

So Got some 0000 steel wool to use..

1) Strip it and steel wool lines an
2) Press hard with the blue max to get it to lay down?

Or any other pointers..

For now we see through a glass, darkly; but then face to face:
now I know in part; but then shall I know even as also I am known.

© 1999 - 2009 Ric Wellman All Rights Reserved.
Contact: tintdude[a]gmail.com