cutting squeegees

I have found the easiest way to cut a squeegee is get your knife into the blade part and then rock the squeegee back and forth, not the blade(olfa) and go to your desired length and shape.
Give it a shot. You can keep your digits safe.
Try it on the floor though.
Just rock the squeegee nothing else.

What kind of squeegee are you refering too

what kind do you usually cut?

What's with the evil eye ...there is MANY different squeegees on the market...don't think it was a stupid question

turbo.of any color

Tip I got from TD.com (Squeegee himself I believe )was to use power tools. I have a little band saw that works wonderful. Used to scare the crap outta me when it came time to cut a fresh smoothie by hand. I buy the long whip without the tube handles (never have used those in auto installs ) and cut um to my own desired lengths. Works good on those yellow bondo cards too when I cut those in half diagonally. Those didn't scare me as bad I just kinda scored them a couple times them break by bending. Teflons are a different story. Very fiberous and don't want to break so easily.

i usually make a pattern line then once i start the cut i have one of my employees bend the part thtas being cut down so it becomes tight makes a faster cut hopefully you dont slip with the knife or it willl gt ugly quick

I have a blue point and craftsman utility cutters. works for me.

I'm probably one of the few tinters that never cared for the turbo squeegee..never liked the way it felt in my hand

exactly how I do it only no pattern line...I just wing it.

I use my Dad's Bandsaw.

i use a freaking laser

I put one end of the turbo in a vise and bend the squeegee down. then if you just touch it with a blade, It'll slice right through. any angle. I like mine with two angles

This is the safest, quickest, quietest, least messy way to cut a squeegee...

Ah yes, the Rabbi shears.

Theirs a tint tools place that sends your black rubber squeegee's already
cut!! Since it's in Florida I say they let the croc's chew on the edge!!
That's what it looked like!!