2005 Pathfinder

I only did the 2 front doors...but the seals tuck nicely. I didn't see any reason to remove the panels. One thing I didn't like though, the windows had a 1 inch cock that swung both ways Adjust patterns accordingly.

one in cock?

the windows cock back and forth......or shift back and forth

the windows cocked one inch...both ways wene you roll tehm up and down...the best way to prevent any gap..TAKE THE WINDOWS OUT...

I didn't have to .......... I know how to work with a 1 inch cock

There's no need to whip it out...you just have to learn how to work with it.

...TMI

nissan pathfinder finally doesnt look anymore

i did one of those a few months ago, i thought it was a pretty sharp vehicle way better looking pathfinder than anyother past years versions i though.


gotta LIKES dat silver


nissan all in all has a pretty damn nice line up of vehicles. well.....except for the xterra

I don't know if the 05 is the same as the 06 , but I had an 06 today for 2 front drs and it was cake. No tucking or panel removal, just one 10mm bolt in the door handle and the top pulls back real nice. Window didn't shift at all

yeah TW nothings changed
Blade and TG both know how to swing both ways with a 1 inch cock

:

I have three such cars for work. We tinted front glasses only on one. Seems it was Charcoal. Looke like other glasses. Will make picture on Monday....

i work in a nissan dealership
the front windows are a breeze compared with having to tint the hatch glass.
i prefer doing the tint on vertical glass instead of removing the rear glass (hinges get in the way when shrinking)
and doing it on the bench
i need to make up a frame i think
enough cocks already, i know the windows cock but you can work around it, dont fight it