Mitsi GTO

I have got one to do on Friday - what are they like? any assistance would be appreciated. Will I be able to do the rear windscreen in one piece?

never heard of a mitsubishi gto now the 03 mitsubishi eclipse backglass is a serious pain in the rump to get in 1 piece but it can be done.

Looks like this MDOG

Looks like a Mitsu 3000... Take the door panels off for those softball shaped doors, and a back brace to reach waaaayyyy back down to to that back glass.

yeah over here they are called a 3000GT, man the car is a pain, take the door panels off, trust me, those rollups throw fingers like a new corvette, the backglass is pretty rough also. i would charge out the ass for this car just to not have to do it you can pull the plastic trim off around the inside of the backglass, it makes it alittle easier to get to the sides of the backglass.

this car is the very reason to have those stainless gasket wizards in the shop..

I can still remember the first stealth I did,,,,before heat shrinking, those door
glasses were throwin up trees, not fingers. 4 hour car, and still had a small crease
or 2. Finally settled on stickin the film on,, rinsing out the rear edge with straight
water , then tacked it down. Once the edge was set,,, I would pull towards the
edge by the mirror, and hard card. PRE HEAT shrink installs sukked big time .

This car was easy I did the back windscreen in one piece and the front doors need heat shinking prior to fitting.

Overall easy motor