Lamberghini

I am going to tint a lamborghini mercilago any suggestions on how to and what to look for and what not to do?
I have to go to there shop to do it . I do not want to

6 months experience and you get to do a lambo?


I'd have turned it down personally, but that's because I suck.

for 6 mths experience i would definitly take a pass on that one.
I WISH i could give u some advice on that car!!!!!!!

you will have to sit in the car with the doors closed to tint it , it is best to have a helper so you can peel the liner then get in the car then have someone shut the door for you

i dont care if its worth 300,000 or $2.

i never go somehwere to tint a car, that is why i pay rent at my own shop

hows that for advice...

Tape off as much felt as you can. You'll need to do the doors down, and get comfy in there, I've done a few.

these cars are so easy to drive, smooth, doesnt even feel like a sportscar

This is how I do them, Its much easier to have the door panels off. Be careful with the rocker pannels, put something where your standing. Be careful, these cars are not easy, even for people with many years of experinece!!

My neck hurts just looking at that pic.

Too much of a pain in the arse for me to attempt....i'd probley drop my olfa on the paint by accident...

that's so cool to see that you pulled that thing in and yanked the panels off AOT i love nothing more than pulling in a brand new, expensive car and tearing it apart.

...nice work there AOT...

AOT, id be careful where you lean (windshield)


all lambo's are a pain to do

no advice on how....

but i would learn how to spell lambo......so you dont look like an idiot on your invoice

tinted one last week.....I don't know about standing on the door jamb, doesn't seem like a good idea, IMO...I laid the piece on the opposite side from where I was sitting, closed the door, peeled it on the inside with my mouth and hand.....was a beeeotch, it's so damn tight in there.....Oh yeah, the one I tinted had a beveled edge on the top edge, like an old lumina, but on the inside....this one was a strip and tint, the first guy left a 1 inch gap, opting not to cover the bevel, I, being the badass I am, covered the bevel...stuck it on there and shrunk the top edge over the bevel , how did you guys do it, just curious........yeah it was kinda scary with the heatgun on the inside of a half a million dollar car....but that's OK, this one was used, only $250,000(used)

Finally moving on up

sad thing is, he is a badass.

he is the best tinter in here also..just look under his avatar

i wanna tint it...where's morgan hill im on the coast of central cali, have yet to do a lambo but reaaaally want to tint it, maybe just so i can pull it in the shop

watch the episode of unique wimps and watch how chico tints a lambo,that should help out alot

Is that the one where he stands on the car or just tries to shrink the film sideways as he's saying he's the best tinter ever?

sideways

I beg to differ this car is not as hard as people say. The hardest part was the custy watching me the whole time.