mazda 5

got one coming in a couple of hours. anyone do one, anything to look for? looks like cake.

is that the little van thing? if so its pretty easy.

Yup, Cake walk. Roll down rears are the hardest part. Kinda toight rear corner like a siena if I remember correctly.

just finished the 5 pretty easy, besides the 11 windows

No crap? 11 windows you say? This car just got expensive to tint without even seeing it.
Haven't had it released downunder......probably too far to boat it.
devil

built in Japan they should be hitting your shores soon

I do lots of these cars . Advice for non - computer cut tinters: have 2 templates made from scrap film- 1 template for the little windows in the front ,1 for the 1/4 window on the rear sliding door.
I have these cut out and ready to go for when I get a call to do one of these cars, I tint those 4 windows first, let them sit while tinting the rest of the car, come back for a hard squeegee on them and your done.

(2006) Kinda like the Pontiac vibe with 4 more side windows. Rear hardly needs shrunk...no shocks for rear glass to get in the way....hatch is all one piece. Sides lay easy... Drivers and Passenger top corner gasket is a little tight when you roll up the windows, so make sure you use the heat gun on the top edges so they dont crinkle up when u roll the windows up... Gaskets pull back easy. Front small windows are behind the side mirrors are a weird trapezoid shape but easy enough. But 11 windows is a PITA, especialy if your are cutting your own patterns.

Dayum! I think I'd take the Vibe anyday over the Mazda 5

i have to agree with ya there