tintdude.com logo




Home | Forum | Lo-Fi Version | Site Map

How do I fix light refraction?



Custom Search



Eric
I had my car professional tinted with 30% 3M CS tint and ever since it's developed this nasty light refraction problem in the rear. I've given it plenty of time to cure, 2 weeks, plenty of sun but I don't think its helped. Heres what my rear window looks like at night, its pretty distracting. What can I do to make it better? icon_confused.gif

Devil with bad attitude
Completely normal and 10/10 for knowing what causes it.
You need a screen without a wire and that isn't available for a modern car like your own.
Nice photo of the problem.
Devil
willie
30 or 35% CS 3M

I agree with Dev -go to front page and read the article about defroster distortion beer.gif
1PEECBARETTA
Look ahead while driving,problem solved
tintguy7
(1PEECBARETTA @ Jun 24 2006, 06:41 AM) [*]408714[/*]
Look ahead while driving,problem solved

Flaugh.gif ,but ain't that so true.

It's always going to be that way!
darkdan
Pay the tinter to redo it. When he redoes it, pay him to scrap off all the defroster lines!
cactustint
3 fixes

1 = accept it

2 = press film along each defrost line with back of fingernail to make it refract less

3 = retint with nother tint that is non metal and 1 mil thin
blade
i didn't think 3M CS had metal in it. and i thought it was 1 mil thickness.
cactustint
(blade @ Jun 24 2006, 02:15 PM) [*]408807[/*]
i didn't think 3M CS had metal in it. and i thought it was 1 mil thickness.

I don't know this 3m cs tint

Maybe just think its thick
darkdan
3M CS is a NR film. 1.1 mils thick (I originally thought it was 1.5 mils, but found out this week it's 1.1)

It's also very soft and flexible. Fingernailing should help a lot. But most likely, it's something they'll have to cope with.
willie
(blade @ Jun 24 2006, 03:15 PM) [*]408807[/*]
i didn't think 3M CS had metal in it. and i thought it was 1 mil thickness.


good point


(darkdan @ Jun 24 2006, 05:20 PM) [*]408832[/*]
3M CS is a NR film. 1.1 mils thick (I originally thought it was 1.5 mils, but found out this week it's 1.1)

It's also very soft and flexible. Fingernailing should help a lot. But most likely, it's something they'll have to cope with.



good answer, can you also clear up the 30% -all I have is 35% on my price sheet dunno.gif
blade
35 not 30 .... maybe 30 after installation, depending on the car's factory glazing.
willie
(blade @ Jun 24 2006, 05:28 PM) [*]408838[/*]
35 not 30 .... maybe 30 after installation, depending on the car's factory glazing.



thanks, I guess I was just wishfull thinking that maybe they had come out with a 30
darkdan
35....30? What's it matter.

1.) Both would be a PITA to work with
2.) Neither are 42.17
willie
(darkdan @ Jun 24 2006, 06:21 PM) [*]408856[/*]
35....30? What's it matter.

1.) Both would be a PITA to work with
2.) Neither are 42.17



lol2.gif
I luv my CS
It matters 5% -ask your wife 5% does matter coffee.gif
darkdan
Then come to MN and show me how to use the stupid stuff.


And, FYI, I'm married to the ice.
Shady Sherlock
(willie @ Jun 24 2006, 04:42 PM) [*]408859[/*]
(darkdan @ Jun 24 2006, 06:21 PM) [*]408856[/*]

35....30? What's it matter.

1.) Both would be a PITA to work with
2.) Neither are 42.17



lol2.gif
I luv my CS
It matters 5% -ask your wife 5% does matter coffee.gif

lol2.gif
willie
(darkdan @ Jun 24 2006, 08:09 PM) [*]408877[/*]
Then come to MN and show me how to use the stupid stuff.


And, FYI, I'm married to the ice.




lol2.gif
perfect example of different tinters and the different films
I cant get global do chiatt that I wnat it too yet I've never had a ounce of trouble with CS

Come with your brother to TX- I'll put you guys up so you dont have the expense of room and board thumb.gif





For now we see through a glass, darkly; but then face to face:
now I know in part; but then shall I know even as also I am known.

© 1999 - 2010 Ric Wellman All Rights Reserved.
Contact: tintdude[a]gmail.com