New shape Civic
Century Tints
Nov 30 2006, 01:23 PM
Have to tint a new shape Honda civic 56 plate on Monday for dealership. It not only has a rear screen( which looks easy) but it has a lower rear plastic vison panel, there seems no possible way of tinting this as there is no way in and its ridged on the inside Is there anything else that can be done?. Its gonna look silly with a clear panel at the bottom.
VaTinterPMan
Nov 30 2006, 01:26 PM
Tape it off and spray paint it lol. It will be black to match. I did that with a old mx3 they have some like that or what ur describing. And it was like a dot matrix but clear glass and it was sep. from the b/g but only like 3 inchs. lower than it. Ummmm I really dont know of anything else without seeing a pic.
naughtydog
Nov 30 2006, 01:47 PM
Just leave it - it is not tintable.
The ///Man
Nov 30 2006, 01:47 PM
If you're talking about the '06+ 4 doors, you can get in there
Tintbds
Nov 30 2006, 09:33 PM
tintman237
Nov 30 2006, 11:51 PM
QUOTE (naughtydog @ Nov 30 2006, 01:47 PM) [*]451476[/*] Just leave it - it is not tintable. are all european cars different than in the u.s.? I haven't seen that on any new hondas at all, but since you responded and seemed to know what c.t. was talking about I am assuming hes over there as well?
TINT
Nov 30 2006, 11:53 PM
i dont remember the new civics having a plate down below, usually they have a third brake light
naughtydog
Dec 1 2006, 01:16 AM
Here's one I did
olletsoc
Dec 1 2006, 05:40 AM
 lets hope they keep those over there QUOTE (naughtydog @ Dec 1 2006, 03:16 AM) [*]451642[/*] Here's one I did 
tintman237
Dec 1 2006, 10:16 AM
QUOTE (naughtydog @ Dec 1 2006, 01:16 AM) [*]451642[/*] Here's one I did  Thanks, some of the toyotas have a little window like that on em too
fimmo
Dec 1 2006, 10:29 AM
leave them,its made of an acrylic material which is anti rain anti fog, stays clear all the time.
you cant spray it as you need to see out of it,you cant tint it same as the rear quarters in the little merc smart cars as the acrylic material doesnt agree with tint,it just gases up and bubbles also you cant cut on it as no matter what blade you use it'll cut into the acrylic and it'll cost you loads to replace.
best just to leave it.
i thought about using vinyl that has all the little dots cut out,the type you print on then put on windows so from the outside there is a logo/poster etc but inside you can see out of. thought about using this kind of material printed black to give a dark look but in the end it woulod be too expensive
exotic window tint
Dec 1 2006, 11:20 AM
its like the old crx huh
tintinater
Dec 1 2006, 03:33 PM
holy crap!!!!! Ain't seen one of them yet, I'm sure they're coming........
Underground
Dec 1 2006, 03:35 PM
Pleeeease let them keep them over there!
tintinater
Dec 1 2006, 03:36 PM
are those tiny quarters on the rear doors??? Yikes!! Hey, why not put that perforated (sp?) black stuff back there, on the outside....
1PEECBARETTA
Dec 1 2006, 03:38 PM
QUOTE (tintinater @ Dec 1 2006, 05:36 PM) [*]451833[/*] are those tiny quarters on the rear doors??? Yikes!! Hey, why not put that perforated (sp?) black stuff back there, on the outside.... that sounds like it could work. good Idea
exotic window tint
Dec 2 2006, 11:05 AM
i want one
firstglass
Dec 2 2006, 04:23 PM
I told you, didn,t i
Century Tints
Dec 3 2006, 02:43 PM
QUOTE (firstglass @ Dec 2 2006, 03:23 PM) [*]452128[/*] I told you, didn,t i Yes you did Andy.
VaTinterPMan
Dec 4 2006, 10:51 PM
Boooo I hope they keep that car over there. Every civic i see doesnt look to bad i would hate to be seeing those all the time.
Tom Cat
Dec 6 2006, 05:48 PM
For now we see through a glass, darkly; but then face to face:
now I know in part; but then shall I know even as also I am known.
© 1999 - 2009 Ric Wellman All Rights Reserved.
Contact: tintdude[a]gmail.com
|