07 mazda 3 sport

For you panel pullers I have one coming in wed for tint but they also want me to add aftermarket door locks to it, any heads up on panel removal on this car ? does it have air bags in the doors ?

I know Mazdas can be a pain getting the wires into the doors, they have plug connectors and not just grommets so it may take longer than normal.

ND

you wont have problems on the panels.

you can just pull the top of the door panel on these, roll it off over the metal lip, when tinted, snap it back over the edge.

However you have to read Mr P.s post , this is a non tint related question

Sorry MrP ..done many of those cars, but never pulled a single panel on them

Real easy one, yank the lil triangle part out, one screw on door handle one armrest pocket, pops right out. Same on rear but no triangle.

Since he asked back in December of 06...i would hope he has it figured out by now.

DOH!!! Didn't see that. HAHAHAAAA Who bumped it??? LOL

Nothing crazy on these door panels, no airbags in doors, on these cars they are in the side curtins...screw behind the door handle & under window switch. typical cheap plastic panels tho so be careful when popping tabs. make sure you have the actuator for the lock cable, it's not the metal rod on these. hope this helps