tintdude.com logo




Home | Forum | Lo-Fi Version | Site Map

01 stratus



Custom Search

Full Version: 01 stratus


JMass
this back glass is kicking my ass.. need help any suggestions.
one slick tinter
what seems to be the problem? shrinking? not sticking? contamination?
TINTDESIGNZ
2 door stratus coupe? its a boitch! Last one I did I soap shrank-with a little pull and stretch on the top!
one slick tinter
guess ive never run into a coupe....i dont remember it if i did and it sounds like i would if i had.
willie
QUOTE (TINTDESIGNZ @ Jan 4 2007, 06:41 PM) [*]462072[/*]
2 door stratus coupe? its a boitch! Last one I did I soap shrank-with a little pull and stretch on the top!


thumb.gif gotta be a 2 door -thats damyum tough

4 doors are cake
Protint
I did one the other day with 3M FX 5 in one piece.

I used the old trusty rusty wet shrink that is demoed in the VW Bug back glass tip. I also used it on an 03 eclipse with no problems. The eclipse was much easier though. thumb.gif
JMass
yea its a 2dr coupe, its kicking my ass.. i use fabric softners , maybe i should try soap method. just is a $|-|17 ton to shrink and doesnt want to ..
willie
QUOTE (JMass @ Jan 5 2007, 12:01 PM) [*]462267[/*]
yea its a 2dr coupe, its kicking my ass.. i use fabric softners , maybe i should try soap method. just is a $|-|17 ton to shrink and doesnt want to ..



Jmass..... hang in there I think everyone here agrees thats one of the toughest out there
The soap shrink will work. The easiest I have ever done one was the soap shrink with the pull and tug method at the top.
I leave alot of excess at the top and Im sure its those top corners that are creating the problem. Slow down and onlyshrink a little at a time in those corners.

Good luck and keep pluggin beer.gif
zolar
try to push as much as possible to the middle of the top

so there is less to shrink in the corners



and definately soap it beer.gif
TintWizard
QUOTE (willie @ Jan 4 2007, 09:34 PM) [*]462110[/*]
thumb.gif gotta be a 2 door -thats damyum tough

4 doors are cake



bingo.gif
TINTDESIGNZ
If all else fails...seam it! thumb.gif
Protint
bingo.gif two pieces shrink a heck of alot easier. I'm telling you once you get the wet shrink lift and pull down you will use it on these cars all the time. thumb.gif

Hang in there krazy.gif
JMass
i suck, haha,,, i ended up 2 peiceing the mother, i hate that crap.. thats the only one i have had to do that to in a very long time.. turned out good but i hate seems. i got another question on that car. I think the dude is goin to want a brow on there here in the future. how do you pop off the rear view mirror,
VIP tint + glass
dang did one yesterday and it kicked my ass. never had any problems before on the coupes but this one had an unusual curve on the top drivers side. on the second piece i justr set it up for a relief cut on the top left only.
TINTDESIGNZ
Those are my least favorite backglasses!
VIP tint + glass
people think im weird because i think the vette and the bug are cake, but i have a hard time on the 3g eclipses. i get em down first try everytime but i bitch and moan about them. and the stratus coupe is basically an eclipse
Protint
I have found the eclipse rear window to be easier than the stratus. I think the stratus has a bit more curve to it. thumb.gif






For now we see through a glass, darkly; but then face to face:
now I know in part; but then shall I know even as also I am known.

© 1999 - 2009 Ric Wellman All Rights Reserved.
Contact: tintdude[a]gmail.com