2004 Pontiac Grand Prix
FilmBlazer
Apr 18 2007, 04:26 PM
The back glass on this is huge... A local sign guy tried to hack this piece out using three seams of sungard... Needless to say I did the rollups for him today and I told him to take the film off the back and I would tint it with Llumar ATR.
Anyhow, will a 36" roll work on this glass? The glass measures 35" from top to bottom in the middle. Not sure if 36" roll will cover the outside of the glass... I'm thinkin' no :(
FB
one slick tinter
Apr 18 2007, 04:41 PM
QUOTE (FilmBlazer @ Apr 18 2007, 08:26 PM) [*]500783[/*] The back glass on this is huge... A local sign guy tried to hack this piece out using three seams of sungard... Needless to say I did the rollups for him today and I told him to take the film off the back and I would tint it with Llumar ATR.
Anyhow, will a 36" roll work on this glass? The glass measures 35" from top to bottom in the middle. Not sure if 36" roll will cover the outside of the glass... I'm thinkin' no :(
FB yep it'll cover it.
tintman237
Apr 18 2007, 05:02 PM
Yep just did one sunday, 36" no problemo
FilmBlazer
Apr 18 2007, 07:17 PM
Schweeet thanks
FilmBlazer
Aug 2 2007, 10:11 AM
Just did another one of these... Man that BG is HUGE! it sux to handle with those damn seats down.
autotinter
Aug 2 2007, 12:54 PM
twotint
Oct 5 2007, 04:28 PM
I just did one of these last night. I don't know what it is but I have trouble with fingers on the side, I shrink the top and bottom no problem. I had a similar thing on the G5. Any help?
willie
Oct 5 2007, 04:31 PM
QUOTE (twotint @ Oct 5 2007, 06:28 PM) [*]551321[/*] I just did one of these last night. I don't know what it is but I have trouble with fingers on the side, I shrink the top and bottom no problem. I had a similar thing on the G5. Any help? Pull the fingers to the bottom on the outside and shrink. Or use Harolds or Mdogs zap technique
Kokomo Tint and Dent
Mar 26 2008, 04:57 PM
I drop the whole backseat and pull the deck lid panel, speakers, and the c pillars on a grand prix. It sounds like a lot but i've done it soo many times its worth the extra work. The gp and the g5 are easy one piece installs even though they're huge windows.
ClassOnGlass
Mar 26 2008, 05:17 PM
not shrunk enough wet check the film after the dry shrink it takes a few seconds more and no fighting fingers in the end result
FilmBlazer
Mar 26 2008, 06:31 PM
QUOTE (Nick Jones @ Mar 26 2008, 07:57 PM) [*]608690[/*] I drop the whole backseat and pull the deck lid panel, speakers, and the c pillars on a grand prix. It sounds like a lot but i've done it soo many times its worth the extra work. The gp and the g5 are easy one piece installs even though they're huge windows. Thats an extra 30 bucks for that!
ClassOnGlass
Mar 26 2008, 06:34 PM
i dont take nothing out just reverse roll that baby right in thur
thatsnappyguy
Mar 26 2008, 07:13 PM
QUOTE (ClassOnGlass @ Mar 26 2008, 07:34 PM) [*]608723[/*] i dont take nothing out just reverse roll that baby right in thur 
tint_audiopros
Mar 26 2008, 11:15 PM
QUOTE (ClassOnGlass @ Mar 26 2008, 06:34 PM) [*]608723[/*] i dont take nothing out just reverse roll that baby right in thur 
Kokomo Tint and Dent
Mar 27 2008, 11:56 AM
how do you reverse roll it without picking up a ton of lint off of the panel? Even if you unroll it flat i would think i'd crease the crap out of the shrunk tint.
one slick tinter
Mar 27 2008, 01:37 PM
I dont take anything out....and I franky it in there. I used to take all that crap out.....before i got myself a bulldozer.
TintWizard
Mar 27 2008, 05:33 PM
QUOTE (one slick tinter @ Mar 27 2008, 03:37 PM) [*]608915[/*] I dont take anything out....and I franky it in there. I used to take all that crap out.....before i got myself a bulldozer. 
ClassOnGlass
Mar 27 2008, 07:20 PM
imo reverse roll is the cleanest way to get a rear shield done
tint_audiopros
Mar 27 2008, 09:25 PM
I can't seem to get the qdp to stick or look good on the rear window matrix around window any tips or suggestions that I haven't tried. The performx slate from sungard used to atleast release from the dots & look uniform all around but the qdp will stick in some spots & not others. thanks in advance.
For now we see through a glass, darkly; but then face to face:
now I know in part; but then shall I know even as also I am known.
© 1999 - 2009 Ric Wellman All Rights Reserved.
Contact: tintdude[a]gmail.com
|