bulldozer modification

i searched and didn't see it anywhere so i figured i'd post it. just got me a new bulldozer and had to do this so i thought i'd show you what i do. we all know how the bulldozer comes flat.


lay it on your table like this and heat it up with your heatgun, slowly push down on the squeegee side once it gets warm enough...to give alittle bend to it.


this little bend gives you much more leverage when squeegeeing behind brake lights. and it's not bent too much to where you can't get it behind certain lights.

Nice Ash totw IMO

Wow some of you guys are genious'. Lovely tip

Cool

it s a good idea. but too basic to get totw imo.

like your opinion counts








just kiddin'

guess i won't be getting your vote

Good tip.
How odd to see an imperial measure nowadays....and you guys built the space shuttle?
Devil

nice.

good tip..i dont know about TOTW,,,but good tip..

i did that with my slammers back before they had the dozer to get better leverage

You got my vote

Sometimes its the simplest ideas that are the most effective. Good tip

why not just get the flat glass bulldozer, then the ribs run all the way down and is much stiffer than the auto dozer, same result, better leverage

good tip, but ever since I got the fg dozer, no need for more leverage




and then there is the nascar fans

DONT GET HEART BROKEN CUZ IT TOOK U 21 YEARS TO THINK OF SOMETHING LIKE THAT. HAHA JUST MESSIN DUDE. ITS A GOOD IDEA, I DO ADMIT IT.

SWEEEET Blade Y ou get my vote

im going to when someone bends it the wrong way...you know someone will....but just wont admit it..

nice. i also like your choice of film on the shelf. does this extra bend tend to pull the film up ?

that is a good question...how about it blade

no...if it had ever created problems for me then i wouldn't recommend it.

Just keep your senses with you when squeegeeing..apply pressure as you push downward, pull the dozer away from glass as you slowly bring it back up and repeat till the bottom of the bg is flushed out.

i bought mine because its flat, a bend won't help get behind the brake lights i have to try and get behind way to use your noodle though and try something new

You could almost use something like that for a gasket puller too. Dont' you think?

Good idea

..that last one was just cuz i wanted to use a new smilie..