tintdude.com logo




Home | Forum | Lo-Fi Version | Site Map

2004 Grand AM



Custom Search

Full Version: 2004 Grand AM


Shades of Gray
Found 2 screws...cant seem to budge the panels. Don't want to brake it obviously. I only found info on the Grand Prix...
HELP
Ryan
tinterbabe
Should just pull back, sorry not at the shop and cant recall off the top of my head.
Just try pulling back the top of the panel with the window rolled down
Good luck beer.gif
Shady Sherlock
Screw behind the lock slide, screw above the door handle, one or 2 under the pull handle and a hidden one behind the bezel that's around the lock slide and handle, then pull up not out....

Hope this helps... dunno.gif
darkdan
Yup, door opener, pop up door lock switch to see another one, one in handle, and I think one behind the reflector.

Pop a few clips and then pull up.
Kokomo Tint and Dent
All you need to do is take off the trim piece behind the inside door handle and lift the top of the panel over the weatherstrip. The speaker cover pops off easy too.
TintWizard
QUOTE (Nick Jones @ Mar 26 2008, 07:53 PM) [*]608687[/*]
All you need to do is take off the trim piece behind the inside door handle and lift the top of the panel over the weatherstrip. The speaker cover pops off easy too.


bingo.gif One of the cars where you don't have to remove the panel to have the benefit of panel removal once you pop tht seal out ..takes under 30seconds to prep each door with seal out .
JRock10
damn, I'm glad I found this. just had one in the shop and it was killing me.
TintWizard
QUOTE (JRock10 @ Apr 1 2009, 02:01 PM) [*]677829[/*]
damn, I'm glad I found this. just had one in the shop and it was killing me.


Glad we could help spit.gif






For now we see through a glass, darkly; but then face to face:
now I know in part; but then shall I know even as also I am known.

© 1999 - 2009 Ric Wellman All Rights Reserved.
Contact: tintdude[a]gmail.com