2007 Lexus IS350

Anything to look out for ? I don't get Lexus cars around here ...laminate glass? gps ir issues ? panel pulling ? dots? you know..any booby traps?

front doors suck-got a little speaker in the way-next time I'm pulling the front panels!

use steel wool on the defrosters,normally get air pockets on the defrost after install

easy car....panels pop off pretty quick if you choose that route. no laminated glass. no matrix issues. yeah the defrosters seem a little thicker than others. like most lexus' do. i believe the 3rd brake light just pops up and out.

Pull front panels, make sure lock and release cables are anchored before putting panel back on!

Pull front panels three screws and life is much better......does the line get air from the thicknessor not dubble melting to get all the stress?

Cool, thanks for the tips guys

shrink the fronts

cake just pull the front doors and you will be good to go

I booked her using the upsell ATX film which I haven't used much of ...for once it'll be nice tinting something I haven't done with a film I've hardly used

SO how did it turn out? Get any pics?

I know this is an old thread but *bump* for pics if any lol

Yes I'm looking to see some pictures to....

I know your From belleville

Yes, turned out real well , sorry, I rarely take pics