Dont Sand It

Well as most of you read in another thread I use masking tape insted of sanding or sharpening my teflon cards. This works reall well with the white teflon IMO. Also I have to add that I also do this for the "sphear" spatula as well, it usually fit in a handle of some sort.

can you explain further? Do you just rip a piece of and rub the card?

You just put it over the edge and use it with the tape on it right?

Got it now - Doh!

Yeah I just put the edge in the middle (longways) then lay it up the sides. I use 1/2 masking tape so its 1/4 inch on each side then cut the ends of the tape cause it will be square and the card is rounded. I dont do this to all my cars just a couple and when the tape gets dirty just peel and remask.

nice

GOTTA TRY THAT