Squeegee with a hard card

For windows that have felt channels(gaskets).Use a white teflon/hard card cut at diagonal shape with a bucket of water.During your prep of the door glass dip the card in the bucket then slip the card into the channel and squegee out the dirt.Before I would use tape to control the dirt or felt.The tape wouldn't always stick or the tape would make the channel to tight to slide the film in.

ive noticed that if your tape doesnt stick, warm it up a bit with your heat gun and it sticks every time, good tip though!!!

if the tape dose not stick use hair spray on the felt to make it tacky let a minute go by then tape it works great

Figures the guy from Long Island would have hair spray handy to figure this one out!

(I know this thread should be left to die but I couldnt help myself!)

If the tape doesn't stick wet a rag with rubbing alcohol and run it on the flet.... wait a minute for it to evaporate and tape it up!

stick a strip or two of gasket wizards in between gaskets and glass. Quick, easy, clean everytime.