Superleggera

Got a lambo superleggera in just now, but back windows are polycarbonate, are all lambos like this??????

Any one got any ideas round this, seen another post below this but got no answers

simple.do fronts as usual,trace rear quarter with marker,cut on front door glass,apply.

Please tell me you are joking

Well, the way I do some roll ups is instead of cutting along the frame and moving it over, then cutting the other side...I use my knife w/o the blade sticking out and push lightly along the frames. When you pull the film off, you will see a line made by the knife. Then on the peel board, I cut 1/8" away from the line. Do you think this will work for this car?

Ok to make this clear the windows are POLYCARBONATE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

FFS i know how to tint, just seen if there is kind of film that can go on

Sorry, I didn't know it wouldnt stick to it...if not, you cant do it...simple as that.

good luck Davy

i wouldnt tint them

Sent the car away never done it, cheers for your help Tim

we do the lamb bentley dealer here in stl and i have done several superleggeras and i traced it with a marker and cut it on the front glass it stuck and looked just fine

any new info on this. i gotta guy with one and he really wants it tinted even though i wont warranty it. i just wanna know if it will bubble like plexi?

i've done a few,never had a problem.i hear it's $6000 to replace

Alright ill tell him that. Its just that he has friends with the same car and they have em tinted. I just wanna make sure. And he's driving in from far so I don't wanna waste his time

If the windows are polycarbonate then its only a matter of time before the film will bubble up - that said if its a newer model maybe they are glass. Might be worth checking