tintdude.com logo




Home | Forum | Lo-Fi Version | Site Map

2002 Range Rover



Custom Search

Full Version: 2002 Range Rover
TintDude Forum > Main > Automotive - Makes and Models > Range Rover


shadowline
Apr 11 2009, 04:45 AM
Got a 2002 Range Rover boked in. Not had one of these in before had the model before, pulled the rear door panals, on those (no problems) and removed the upper internal rubber seal/gasket on the top of the doors. Where are the fixings for the rear door card on the 2002 model (havent looked at one close up), and does the upper internal seal pull off like the earlier one? Or can the film be slide in? Thanks Guys
tintmor
Apr 11 2009, 05:10 AM
QUOTE (shadowline @ Apr 11 2009, 11:45 AM) [*]679794[/*]
Got a 2002 Range Rover boked in. Not had one of these in before had the model before, pulled the rear door panals, on those (no problems) and removed the upper internal rubber seal/gasket on the top of the doors. Where are the fixings for the rear door card on the 2002 model (havent looked at one close up), and does the upper internal seal pull off like the earlier one? Or can the film be slide in? Thanks Guys

which Range Rover is it.
Shady Sherlock
Apr 11 2009, 06:55 AM
Can't remember if the seals stay on the door panel or not, but the panels are easy..... beer.gif
shadowline
Apr 11 2009, 07:31 AM
QUOTE (tintmor @ Apr 11 2009, 12:10 PM) [*]679797[/*]
QUOTE (shadowline @ Apr 11 2009, 11:45 AM) [*]679794[/*]
Got a 2002 Range Rover boked in. Not had one of these in before had the model before, pulled the rear door panals, on those (no problems) and removed the upper internal rubber seal/gasket on the top of the doors. Where are the fixings for the rear door card on the 2002 model (havent looked at one close up), and does the upper internal seal pull off like the earlier one? Or can the film be slide in? Thanks Guys

which Range Rover is it.


2002 Range Rover Vogue the "newer" shape one
tintmor
Apr 11 2009, 07:42 AM
QUOTE (shadowline @ Apr 11 2009, 02:31 PM) [*]679822[/*]
QUOTE (tintmor @ Apr 11 2009, 12:10 PM) [*]679797[/*]
QUOTE (shadowline @ Apr 11 2009, 11:45 AM) [*]679794[/*]
Got a 2002 Range Rover boked in. Not had one of these in before had the model before, pulled the rear door panals, on those (no problems) and removed the upper internal rubber seal/gasket on the top of the doors. Where are the fixings for the rear door card on the 2002 model (havent looked at one close up), and does the upper internal seal pull off like the earlier one? Or can the film be slide in? Thanks Guys

which Range Rover is it.


2002 Range Rover Vogue the "newer" shape one

seals stay on ,panals pull at top just take one screw out at door open lever an pop panal at top all rest no problem easy enough car.
shadowline
Apr 12 2009, 12:22 AM
Cheers Guys, i know the panel pulls quickly on the 97 style models, but i havent seen the newer shape one close up. Hopefully then they should be ok, at least the quarterlights are easier than the bloody old model!!





For now we see through a glass, darkly; but then face to face:
now I know in part; but then shall I know even as also I am known.

© 1999 - 2009 Ric Wellman All Rights Reserved.
Contact: tintdude[a]gmail.com