tintdude.com logo




Home | Forum | Lo-Fi Version | Site Map

Large install



Custom Search

Full Version: Large install


3MFAN
Isn't there some one on here that has a crew that goes around and does large installs? I have up to 20,000 sq ft to install. Please let me know what areas you travel to? These are large windows. ground level approx 60" wide by 108" high
Cuttingedge
QUOTE (3MFAN @ Sep 8 2009, 07:18 PM) [*]715305[/*]
Isn't there some one on here that has a crew that goes around and does large installs? I have up to 20,000 sq ft to install. Please let me know what areas you travel to? These are large windows. ground level approx 60" wide by 108" high


Where is the job located? You may get a better response that way. Is this a job you are subbing out or are you the property owner?
ClassOnGlass
where is the location of the install ???? dunno.gif
dryshrinker
QUOTE (3MFAN @ Sep 8 2009, 07:18 PM) [*]715305[/*]
Isn't there some one on here that has a crew that goes around and does large installs? I have up to 20,000 sq ft to install. Please let me know what areas you travel to? These are large windows. ground level approx 60" wide by 108" high


all over florida. were ready when you are. 20.000 in 20 days.
MobileTintInc
Call me 570-815-6158 or email MobileTintInc@yahoo.com

Ive traveled 1300mi to install and know people in various states to visit and stay with.

Please contact me with more information on your location and building details.
TomTint
QUOTE (3MFAN @ Sep 8 2009, 07:18 PM) [*]715305[/*]
Isn't there some one on here that has a crew that goes around and does large installs? I have up to 20,000 sq ft to install. Please let me know what areas you travel to? These are large windows. ground level approx 60" wide by 108" high

New England area. 1500 / 2000 sf per day 04 mil or less. More than 04 mil , more time less sf per day. Assume allum frame rubber gaskets
dryshrinker
QUOTE (TomTint @ Sep 8 2009, 08:54 PM) [*]715326[/*]
QUOTE (3MFAN @ Sep 8 2009, 07:18 PM) [*]715305[/*]
Isn't there some one on here that has a crew that goes around and does large installs? I have up to 20,000 sq ft to install. Please let me know what areas you travel to? These are large windows. ground level approx 60" wide by 108" high

New England area. 1500 / 2000 sf per day 04 mil or less. More than 04 mil , more time less sf per day. Assume allum frame rubber gaskets


if i bring my altered ego ill hang 2000+ a day..
Tinitman
Finishing up an 18k install this week. Have another in two weeks. We should be able to fit you in
Customtinting
Please post the location. PM me, I can help you out with info on a crew.

Dan
TomTint
QUOTE (dryshrinker @ Sep 8 2009, 08:56 PM) [*]715328[/*]
QUOTE (TomTint @ Sep 8 2009, 08:54 PM) [*]715326[/*]
QUOTE (3MFAN @ Sep 8 2009, 07:18 PM) [*]715305[/*]
Isn't there some one on here that has a crew that goes around and does large installs? I have up to 20,000 sq ft to install. Please let me know what areas you travel to? These are large windows. ground level approx 60" wide by 108" high

New England area. 1500 / 2000 sf per day 04 mil or less. More than 04 mil , more time less sf per day. Assume allum frame rubber gaskets


if i bring my altered ego ill hang 2000+ a day..

maybe u me and v could hang 5 k a day and still make it home 4 the weekend
FREDSTINTING
there is a company call us film crew that will send guys to your install and they represent your company very well
so no on ever know it was a job was subed out

http://www.usfilmcrew.com/
jttint1
new york city,longisland,brooklyn,queens...........im here waiting bananarock.gif
dryshrinker
QUOTE (TomTint @ Sep 8 2009, 09:32 PM) [*]715341[/*]
QUOTE (dryshrinker @ Sep 8 2009, 08:56 PM) [*]715328[/*]
QUOTE (TomTint @ Sep 8 2009, 08:54 PM) [*]715326[/*]
QUOTE (3MFAN @ Sep 8 2009, 07:18 PM) [*]715305[/*]
Isn't there some one on here that has a crew that goes around and does large installs? I have up to 20,000 sq ft to install. Please let me know what areas you travel to? These are large windows. ground level approx 60" wide by 108" high

New England area. 1500 / 2000 sf per day 04 mil or less. More than 04 mil , more time less sf per day. Assume allum frame rubber gaskets


if i bring my altered ego ill hang 2000+ a day..

maybe u me and v could hang 5 k a day and still make it home 4 the weekend


i dont think vclimber hangs film. he's a SALESMAN. lol2.gif
TomTint
QUOTE (dryshrinker @ Sep 8 2009, 10:03 PM) [*]715347[/*]
QUOTE (TomTint @ Sep 8 2009, 09:32 PM) [*]715341[/*]
QUOTE (dryshrinker @ Sep 8 2009, 08:56 PM) [*]715328[/*]
QUOTE (TomTint @ Sep 8 2009, 08:54 PM) [*]715326[/*]
QUOTE (3MFAN @ Sep 8 2009, 07:18 PM) [*]715305[/*]
Isn't there some one on here that has a crew that goes around and does large installs? I have up to 20,000 sq ft to install. Please let me know what areas you travel to? These are large windows. ground level approx 60" wide by 108" high

New England area. 1500 / 2000 sf per day 04 mil or less. More than 04 mil , more time less sf per day. Assume allum frame rubber gaskets


if i bring my altered ego ill hang 2000+ a day..

maybe u me and v could hang 5 k a day and still make it home 4 the weekend


i dont think vclimber hangs film. he's a SALESMAN. lol2.gif

ohh he is one of thooose guys. And 4 who does he sell
vclimber
QUOTE (dryshrinker @ Sep 8 2009, 07:03 PM) [*]715347[/*]
QUOTE (TomTint @ Sep 8 2009, 09:32 PM) [*]715341[/*]
QUOTE (dryshrinker @ Sep 8 2009, 08:56 PM) [*]715328[/*]
QUOTE (TomTint @ Sep 8 2009, 08:54 PM) [*]715326[/*]
QUOTE (3MFAN @ Sep 8 2009, 07:18 PM) [*]715305[/*]
Isn't there some one on here that has a crew that goes around and does large installs? I have up to 20,000 sq ft to install. Please let me know what areas you travel to? These are large windows. ground level approx 60" wide by 108" high

New England area. 1500 / 2000 sf per day 04 mil or less. More than 04 mil , more time less sf per day. Assume allum frame rubber gaskets


if i bring my altered ego ill hang 2000+ a day..

maybe u me and v could hang 5 k a day and still make it home 4 the weekend


i dont think vclimber hangs film. he's a SALESMAN. lol2.gif


evileye.gif Wha chooo talkin bout Wyllis???? I just put up 600sq ft of high vlt silver bullet... Flaugh.gif


dryshrinker
QUOTE (vclimber @ Sep 8 2009, 11:43 PM) [*]715361[/*]
QUOTE (dryshrinker @ Sep 8 2009, 07:03 PM) [*]715347[/*]
QUOTE (TomTint @ Sep 8 2009, 09:32 PM) [*]715341[/*]
QUOTE (dryshrinker @ Sep 8 2009, 08:56 PM) [*]715328[/*]
QUOTE (TomTint @ Sep 8 2009, 08:54 PM) [*]715326[/*]
QUOTE (3MFAN @ Sep 8 2009, 07:18 PM) [*]715305[/*]
Isn't there some one on here that has a crew that goes around and does large installs? I have up to 20,000 sq ft to install. Please let me know what areas you travel to? These are large windows. ground level approx 60" wide by 108" high

New England area. 1500 / 2000 sf per day 04 mil or less. More than 04 mil , more time less sf per day. Assume allum frame rubber gaskets


if i bring my altered ego ill hang 2000+ a day..

maybe u me and v could hang 5 k a day and still make it home 4 the weekend


i dont think vclimber hangs film. he's a SALESMAN. lol2.gif


evileye.gif Wha chooo talkin bout Wyllis???? I just put up 600sq ft of high vlt silver bullet... Flaugh.gif





whoops, my bad... not tryin to keep a homie down or anything...
3MFAN
It is in the Midwest
blade
well...that narrowed it down a little bit. good thing you want to elaborate on the job. Flaugh.gif
Booms2Go
Maybe he wants to see how many "MMM haters" will scramble for the opportunity to hang 20K square... Flaugh.gif
thatsnappyguy
i think he is full of %&$# since he cant give a location.
blade
or he's just covering his azz so no one lurking here snakes the job out from under him. Flaugh.gif
3MFAN
QUOTE (blade @ Sep 9 2009, 09:31 AM) [*]715438[/*]
or he's just covering his azz so no one lurking here snakes the job out from under him. Flaugh.gif

finally someone with some common sense. I see competitors on here talking about jobs they are bidding and asking how to bid it. I just laugh to myself as I am heading to the job that they didn't get. So I really don't think the specific area really matters to get some info on installers.
MobileTintInc
Count me out, I was hoping you were the end customer. Why wouldnt you just want the job for yourself?
thatsnappyguy
QUOTE (MobileTintInc @ Sep 9 2009, 03:36 PM) [*]715468[/*]
Count me out, I was hoping you were the end customer. Why wouldnt you just want the job for yourself?

its a 20k square feet job, some help would be nice. i'll fly out there to make a few grand, i can use a few days out of the shop.
TomTint
QUOTE (3MFAN @ Sep 9 2009, 02:04 PM) [*]715454[/*]
QUOTE (blade @ Sep 9 2009, 09:31 AM) [*]715438[/*]
or he's just covering his azz so no one lurking here snakes the job out from under him. Flaugh.gif

finally someone with some common sense. I see competitors on here talking about jobs they are bidding and asking how to bid it. I just laugh to myself as I am heading to the job that they didn't get. So I really don't think the specific area really matters to get some info on installers.

20 k s/f is a good hit if you can close the deal. I can not imagine there would be any problem getting people to help you with it. If you have a 3 man crew yourself, you should be able to bang it out in no time. Unless you are under some kind of time limitation tell custy its going to take 3 weeks and if you finish early you look like a champ
thatsnappyguy
each prefesional tinter should be able to do about 500-600 sqft per day when it comes to commerical tinting. the most i did was 800 in 14 straight hours...so figure an 8 hour day with a lunch break is 7 hours work time...that would be 400 sp ft per day.
Zrok
i'm in the midwest.. have a crew of 5 or 6 available that can help..

I'm an installer, but work for a major midwest distributor.. we have dealer networks all over the midwest that can help with the install... we have 5 or 6 of our own guys that can hang it if you're concerned about losing the job to a competitor.

either way PM me with some more details and i'll put you in touch with my boss (the owner of the company)
acetinter
drool.gif this is you guys, me too. I have family in Iowa and could have a crew of three knock it out. work with 3m regularly and all the other guys. butter baby!!!
TintJunkie
QUOTE (3MFAN @ Sep 8 2009, 06:18 PM) [*]715305[/*]
Isn't there some one on here that has a crew that goes around and does large installs? I have up to 20,000 sq ft to install. Please let me know what areas you travel to? These are large windows. ground level approx 60" wide by 108" high



QUOTE (3MFAN @ Sep 9 2009, 07:30 AM) [*]715391[/*]
It is in the Midwest



QUOTE (3MFAN @ Sep 9 2009, 01:04 PM) [*]715454[/*]
QUOTE (blade @ Sep 9 2009, 09:31 AM) [*]715438[/*]
or he's just covering his azz so no one lurking here snakes the job out from under him. Flaugh.gif

finally someone with some common sense. I see competitors on here talking about jobs they are bidding and asking how to bid it. I just laugh to myself as I am heading to the job that they didn't get. So I really don't think the specific area really matters to get some info on installers.



Why would you post asking for help before the job is sold? Your original post sounded like you had the job.
mcpcola
This is so funny I am hurting from laughing.

LEO'n'DARTZ
QUOTE (vclimber @ Sep 8 2009, 08:43 PM) [*]715361[/*]
QUOTE (dryshrinker @ Sep 8 2009, 07:03 PM) [*]715347[/*]
QUOTE (TomTint @ Sep 8 2009, 09:32 PM) [*]715341[/*]
QUOTE (dryshrinker @ Sep 8 2009, 08:56 PM) [*]715328[/*]
QUOTE (TomTint @ Sep 8 2009, 08:54 PM) [*]715326[/*]
QUOTE (3MFAN @ Sep 8 2009, 07:18 PM) [*]715305[/*]
Isn't there some one on here that has a crew that goes around and does large installs? I have up to 20,000 sq ft to install. Please let me know what areas you travel to? These are large windows. ground level approx 60" wide by 108" high

New England area. 1500 / 2000 sf per day 04 mil or less. More than 04 mil , more time less sf per day. Assume allum frame rubber gaskets


if i bring my altered ego ill hang 2000+ a day..

maybe u me and v could hang 5 k a day and still make it home 4 the weekend


i dont think vclimber hangs film. he's a SALESMAN. lol2.gif


evileye.gif Wha chooo talkin bout Wyllis???? I just put up 600sq ft of high vlt silver bullet... Flaugh.gif

dunno.gif SILVER BULLET is MY FILM CODE lol2.gif
But I NEVER sent You films lol2.gif
tintgod
QUOTE (Zrok @ Sep 11 2009, 08:30 PM) [*]715879[/*]
i'm in the midwest.. have a crew of 5 or 6 available that can help..

I'm an installer, but work for a major midwest distributor.. we have dealer networks all over the midwest that can help with the install... we have 5 or 6 of our own guys that can hang it if you're concerned about losing the job to a competitor.

either way PM me with some more details and i'll put you in touch with my boss (the owner of the company)

what distr. do you work install for?
tint_audiopros
im in the midwest & have a 3 man crew, send me a pm I'll give you my contact info.
tint123
Appears this guy is just a tire-kicker, and not serious.
He woulda posted his city & state, along with pics of the prospective job.
He is just too evasive to be serious.
marcellom
i am located in tampa
www.justfinetinting.com

let me know what u need
SoCar
QUOTE (tintgod @ Sep 13 2009, 07:51 AM) [*]716034[/*]
QUOTE (Zrok @ Sep 11 2009, 08:30 PM) [*]715879[/*]
i'm in the midwest.. have a crew of 5 or 6 available that can help..

I'm an installer, but work for a major midwest distributor.. we have dealer networks all over the midwest that can help with the install... we have 5 or 6 of our own guys that can hang it if you're concerned about losing the job to a competitor.

either way PM me with some more details and i'll put you in touch with my boss (the owner of the company)

what distr. do you work install for?



i'd guess Midwest Marketing...
Birmingham Solar Films
I have a traveling crew. I have had part in FED 26 Plaza, IMF, UBS, Westchester Airport, World Bank, Marriott, and many more high profile jobs. My web site is www.birminghamsolarfilms.com , my personal e-mail is hitide1975@ymail.com and my number is 205-913-2018. I look forward to hearing from you.
Bob Bramlett






For now we see through a glass, darkly; but then face to face:
now I know in part; but then shall I know even as also I am known.

© 1999 - 2009 Ric Wellman All Rights Reserved.
Contact: tintdude[a]gmail.com