Jump to content

bamh5

 Subscribers
  • Content count

    129
  • Joined

  • Last visited

  • Days Won

    1

bamh5 last won the day on November 5 2014

bamh5 had the most liked content!

About bamh5

  • Rank
    Member

Profile Information

  • Gender
    Male
  • Age
    28
  • Experience
    10
  • Location
    Michigan
  • Country
    United States

Recent Profile Visitors

1,645 profile views
  1. Michigan Windshield Tint

    Well ya I can't be in every courtroom at once, it's physically impossible
  2. Michigan Windshield Tint

    Troops have tried for years to interpret the law as you did, and they fail everytime in court if they write someone a tint ticket when they have an exemption note. Not trying to be a dick, just giving the guy the right answer.
  3. Michigan Windshield Tint

    Not sure where this came from, but that's not how the actual law is written. If you have a note/script in Michigan you can install whatever you want as long as it's not over 35% reflectivity.
  4. Michigan Windshield Tint

    http://www.legislature.mi.gov/(S(bcujfcqnkms44vyrym4cmidy))/mileg.aspx?page=getObject&objectName=mcl-257-709 "(e) A special window treatment or application determined necessary by a physician or optometrist, for the protection of a person who is light sensitive or photosensitive, if the owner or operator of a motor vehicle has in possession a letter signed by a physician or optometrist, indicating that the special window treatment or application is a medical necessity. However, the special window treatment or application shall not interfere with or obstruct the driver's clear vision of the highway or an intersecting highway."
  5. Michigan Windshield Tint

    The troop is right, the script is all you need. Some officers in Michigan seem to think you need it added to your license as a restriction, that's not true. With a note from a doctor or optometrist in Michigan you can tint your windows any shade you want including the windshield. I personally had 35% on my windshield for a few years and loved it. Depending on your headlights a 55% would be better. I have been following Hb5634 for a possible tint law change in Michigan.
  6. Doesn't look they free handed it, it looks like who ever cut it changes the angle of their knife while cutting the top.
  7. Looking for some air 80 if anyone has any they are willing to get rid of. (No I'm not a llumar dealer, this is the only llumar product I use) Pm please
  8. 2018 Compass

    10mm screw behind the door handle, and a philips screw on the outside of the door panel. I removed both of these and it gave me enough room to pull the sweeps without removing the whole panel. The back window was a pain. Easy shrink once you get the pattern cut out. The wiper mount is in the middle of the pattern on the bottom, and the top of the window meets right up to the spoiler with no room to cut around the border. When I get another I'll be removing the spoiler.
  9. Small Miscut, Should I Ask for Fix?

    That should be redone...
  10. 2018 Malibu sedan

    Tried to pop or pull the top of these panels back yesterday. Couldn't for the life of me get them to come loose? Ended up having to take the whole panel off
  11. 2016 cruze

    did one of these yesterday. Normally I am a panel puller, but i found these to be a pain to take off. The clips do not separate from the sweep as easy as the charger or 300's do. As stated above, the sweeps are loose. If you are dead set on panel pulling, there are (5) 7mm screws for the back panels. One behind the door opening handle. one at the very bottom of the door panel. The other three are around the pull handle/window switch. The pull handle must be taken off to get to the two behind it. Not sure on number of screws for fronts, as I tucked those.
  12. There are 3 rolls of suntek carbon 40x100 on ebay for $150 each. they have 5,18,and 35. If you do use suntek carbon, this is a great deal to get the rolls at a much cheaper price. http://www.ebay.com/itm/Car-Window-Tint-18-40x100-Ft-Suntek-Window-Film-/181954456831?hash=item2a5d54acff:g:CTQAAOSwu4BV6cHh&vxp=mtr
  13. 2013 equinox

    I pulled the panels on on the front, one 7mm behind the handle, and two 8mm just below the handle. For the rear I removed the 7mm behind the handle, but I pulled the top back and grabbed the seal out. To put the rear back on I flexed the top of the panel. The rear should really be removed to get the sweep, but I could not figure out where to get to the screws holding the panel on. The rest of the car was simple.
×