Jump to content
Advertise on TintDude! Contact us for details.
Contact us at admin@tintdude.com
spacer
Advertise on TintDude! Contact us for details.
Contact us at admin@tintdude.com
spacer
Sign in to follow this  
Guest tony01

viper 4105 installed on dodge diesel 2001

Recommended Posts

Guest tony01

Hi All,

This ismy first post here I installed my first remote starter after reading so many post here it gives me motivation to do it, I only installed remote starter nothing else I have only two issues one is parking lights does not come on and second one is delay time on starting. Here is my wiring sequence.

Main harness 9 pin

1, light green black....(-) 200mA factory alarm disarm...I not used it.

2, green/white...........(-) 200mA factory alarm rearm......, ,,, ,,,,,,,,,,,,,,,,,,.

3, yellow.....................(+) ignition out(to alarm) not used

4, white/blue..............(-)activatin input, not used

5, orange...................(-) 500mA groung when locked/anti grind output , not used

6 brown.....................(-) 200mA horn output,...connected to black/red wire at stearing col harness.

7 red /white...............(-) 200mA trunk release output, not used.

8 black......................ground, look for solid good ground should be bare metal.

9 white.....................(+/-) light flash output,I am not sure which wire should go here I hook up the parking lights here may be this is not the right place thats why parking lights are not coming on when I start the truck remotely please tell me if I hook up the parking light right or I have to hook up somewhere else.

Thanks

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×