Paintless Dent Repair & Vehicle Wraps
772 topics in this forum
-
- 1 reply
- 464 views
North idaho installer willing to travel . Hundreds of wraps under belt. Custom bumper to bumper strip kits
Last reply by Vinylspec, -
- 2 replies
- 489 views
HI all , just joined as looking to learn some window tinting and vinyl wrapping so looking to see if anyone has any positive feedback from vinyl wrapping training in the UK ? Thanks in Advance
Last reply by WearTheFoxHat, -
- 15 replies
- 5.1k views
Hi, I just installed 3M 1080 gloss black wrap on my "diffuser". Did this on my BMW 328i F30 which has a non-m-sport bumper. Problem is that this "diffuser" is non-removable, and there is only a groove which separates it from the rest. I have cut along this groove and it looks good. But I'm pretty sure this edge won't hold forever. I was thinking of sealing the edge. And I thought of using the paint touchup clearcoat to use in this groove where the vinyl edge is. Will this work good? Will it stick to the vinyl and the paint? And if I want to remove it in the future, will I be able to without damaging the paint underneath (when I have added the clear coat line)…
Last reply by Nfscustoms, -
- 7 replies
- 902 views
has anyone done a wrap in matte purple they have pics of and would recommend?
Last reply by Nfscustoms, -
- 2 replies
- 398 views
Hey guys, I'm looking for a website that has race stripes and vinyl graphics at a good price as I find myself doing more and more at my shop. I have a Dodge and Mini dealership nearby so something I can sell them would be awesome. Any thoughts?
Last reply by Pyramids, -
- 3 replies
- 1.3k views
Im in the uk and looking for a supplier of vinyl wraps that you guys would revommend? Mainly for colour changing vehicles. Also is kpmf ritrama vinyl any good? Thanks in advance!
Last reply by Pyramids, -
- 3 replies
- 664 views
Going to SEMA this year . We are getting into color change wraps . Any one know of companies putting on seminars or training at the show ?
Last reply by Vinylspec, -
- 8 replies
- 780 views
We recently wrapped a Utility bed with 3m IJ180CV3 with 3m 8519 luster. The entire wrap was a nightmare, but we got it done. Then two weeks later our customer stops by and I notice that along a body line (a spot welded body line) there are tears along the entire seem. I checked the back side of each of these seams and they are spot welded about every inch or so along the entire seam. What would cause this? I doubt that the entire utility body is flexing enough to cause this kind of tearing. Also it does not get cold enough here in GA to cause this type of tearing either. Any ideas?
Last reply by Lion, -
- 0 replies
- 435 views
From a single vehicle to an entire fleet, professionally designed and applied graphics not only raise the profile of your business, they are also one of the most effective forms of advertising. Due to an increase in vehicle advertising and new technology the requirement arose to offer our customers an alternative to single colour flat vinyl graphics. Vehicle wraps are an eye-catching advertising tool that doesn't wait to be seen but goes out and proactively markets itself. This approach is quickly becoming an outdoor standard as a cost-effective mobile billboard. With long commutes becoming more commonplace it's much easier to promote a business or product to a wider a…
Last reply by Paperbox & Lime Design, -
- 2 replies
- 650 views
hello all, as the topic title explains, I have recently been introduced to the wonderful world of vinyl wrapping, which still strikes me funny as I'm also now just realizing that I've been seeing wraps around for many years, all the while remaining totally unaware of what they were! That being said, I am now becoming very interested in the process, and especially with customization. So, my burning questions are: • what program (or programs) are wraps with graphics design in? Are they photoshop files that are edited to fit specific printing dimensions or is there some other sort of rending program that is commonly used for creation? • what kind of variations…
Last reply by Vinylspec, -
- 27 replies
- 2.3k views
Hi Tintdude, I'm not a professional in this area, but I found your website and wanted to know your thoughts. Thanks for putting up with me. I have a boat that looks just like this: I want to wrap the upper part of the side in a solid-color vinyl, leaving the bottom part it's natural color. The width (top -> bottom) of that area is about 9 inches all around, and the boat is 26 foot long on both sides, so I am thinking about 54-58 feet of a vinyl roll will do it. My concern is: how wide should my vinyl roll be? I was thinking that if I go 10-inch wide roll, I would be able to m…
Last reply by Vinylspec, -
- 13 replies
- 1.8k views
Up to this point my wrap experience has been roofs and other small portions on customer cars. This winter I decided to start a wrap on my personal car to expand my skills and experience. Thought I would share with you guys!
Last reply by Ridler, -
- 9 replies
- 617 views
So I just finished wrapping a sled and there is a bunch of rivets on the tunnel that the vinyl lays over. It's on there and I probable should have removed them first but too late. What do you suggest?
Last reply by DynamicATL, -
- 10 replies
- 1.2k views
A friend of mine wants me to try and wrap his 85 Corvette the 3m 1080 I am looking comes in 60" wide but the hood measures 80" wide and about 65" to the hood tips. so my question would you seam it and if so were or will this film stretch enough to cover the corners at the top?
Last reply by FormidableSloth, -
- 5 replies
- 927 views
So to start out... a few weeks ago my car was dirty and I had a lapse in good judgement due to being exhausted and i lightly used the brush to clean the vinyl and when I say literally every panel had small scratches I mean it... I cleaned and checked the soft brush they had but it still scratched the hell out of the vinyl! I knew that it should never be used and up until then I used a microfiber wash mitt with no issues but I was being lazy. Well needless to say I went straight home and heated every inch to 180-190 and every light scratch that was there disappeared... I honestly couldn't believe it! Also I couldn't get one straight answer from anyone online about how to…
Last reply by TintOhio, -
- 2 replies
- 451 views
I have scratches i need to get out. Im wanting to enter car shows but those ring scratches on door handles are horrible, what can i do?
Last reply by WearTheFoxHat, -
- 19 replies
- 6.5k views
We are doing a full wrap on a 2008 scion TC. This is an amazing color. Day 1 * disassemble the mirrors, door handles, bumpers, side skirts, gas tank cover, etc. * minor bodywork including filling the rock chips, repairing the scratches and PDR for a couple small dings. * complete wash, wipe the whole car down with alcohol, making sure all the edges are dust free. Day 2 (half day) * finished preps for bumpers, sanded down all the scratches and rock chips. * started on fenders, mirrors, trunk lit and the driver side of the car. 2 more days to go.... stay tune and check out our Facebook picture for latest update. https://www.facebook.com/TintW…
Last reply by TintOhio, -
- 9 replies
- 871 views
New guy here, looking to get into wrapping as a DIYer at first, and maybe move into it professionally if I can ever afford a certification course from avery or 3m. Anyway, I've been doing as much research as I can on wrapping and I noticed that in FormidableSloth's thread, he was priming and sealing the whole car before wrapping. I'm assuming this isn't a necessary step, but what good does it do to prime over the factory paint? if anyone's curious, i'm planning on wrapping my 02 Camaro convertible matte black.
Last reply by TintOhio, -
- 0 replies
- 725 views
Hi everyone, I am new to this forum, I usually read signs101 for vehicle wraps but I discovered tintdude and wanted to check it out. I have a question for you all. As part of my work, I sell vinyl graphics and vehicle wraps. Having spent years in the industry, I have had too many horror stories to count so I have contracts in place for the client to sign, to protect myself. The contracts have cost me hundreds of dollars in attorneys fees which got me thinking: what if a vehicle wrapper could buy a contract template that would protect them from horror stories and ensure that every job goes smoothly? It would include: Preliminary works including artwork, intellectual p…
Last reply by flamingo, -
- 6 replies
- 772 views
So I have been lurking for a while reading up on wrapping and watching tons and tons of videos. I was wondering if you guys could help me with a few questions but first some information on the car: 1999 BMW M5 - Paint is in bad shape. It was sprayed some kind of color changing paint color and it looks and FEELS awful. It doesn't have many dings or dents but I will be checking, bondo and sanding any areas that I don't think is right - I already have the wrap. It is Oracal 651G in gloss white. I got a stellar deal on it. I have 50 yards by 48" so I have plenty to wrap this a couple times if it comes out really really bad. - I want to wrap the roof and mirrors black. …
Last reply by Vinylspec, -
- 2 replies
- 2.2k views
Hey guys I plan on getting into PDR in the future and I'm wondering which kit you guys recommend? I don't want a "starter kit" of sorts. Looking for decent quality that will last. Thank you!
Last reply by darrelmil, -
- 13 replies
- 1.4k views
New guy to the forums..Im seriously considering wrapping my truck this winter, and I have a few questions. 1.What's a good band of wrap? 2.How much will I need to wrap a crew cab Silverado? 3.What are some key tips for someone that never wrapped?
Last reply by TintOhio, -
- 16 replies
- 2.4k views
Going to a wrap course next week then to sema then will tackle wrapping over the winter .Will be only doing color change to compliment my window tint business . From the experience guys how long would it take 2 guys to wrap say a 2012 bmw 3 series . i will be using avery supreme. . some people say 2 days some keep the car for a week .
Last reply by Supreme, -
- 3 replies
- 504 views
I have a 2010 Lexus is350c with the top wrapped in carbon fiber. I accidentally ran under a gate barrier and it marked up the top of my wrap with white paint. How can I clean these marks off? It won't come off with my fingernails and its several fairly large areas. I appreciate all help
-
- 2 replies
- 487 views
Whats up guys I'm contemplating wrapping my sn95 (94-98 mustang) and have no idea on how much i need as Im going with Blue raspberry metallic from 3m as I'm going to order 100sq ft i thought that would be plenty but some say it may not be enough also with the surface of the car fadded paint chipping clear should i be okay to just block it with some fine grit paper and will the 3m bond to primer? As i plan to fill some dents and shave emblems and key cylinders
Last reply by FormidableSloth, -
- 4 replies
- 315 views
I'm looking to see if there is any vinyl supplier near st.louis mo that I could buy vinyl from looking to do my van soon.
Last reply by flat rock stan, -
- 28 replies
- 9k views
Last reply by WearTheFoxHat, -
- 5 replies
- 597 views
where is the best place to get a good price on avery supreme wrap vinyl . I use grimco but there price are crazy unless your doing volume .
Last reply by waxworkz, -
- 5 replies
- 486 views
Hi Guys! Long time, not post! Been super busy. Anyone know of a reputable wrap shop within 100 miles of Jackson Mississippi?
Last reply by waxworkz, -
- 2 replies
- 725 views
For almost 3years now, car wrap has been a supporting source of income for me and my entire family, earning about 265 weekly. Our cars has been resourceful, and a great innovations I would say. You can as well email Ads-to-go through info@adstogo.us and thank me later.
Last reply by Supreme, -
- 4 replies
- 585 views
So I'm getting ready to wrap my shop truck that has been a project of mine for a while. I've done wrap accents but never a full vehicle and I'm just looking to make it all one color since I had to do some bodywork to repair some spots and they are in epoxy primer now. My question is, when wrapping the lower parts of the truck, like the rockers and bottom parts of the bed, do you bring the vinyl to the very edge and then use the edge sealing tape over the edge of the vinyl and then around the back side of the panel or do you cut short of the edge by a little and then seal with the tape so it doesn't wrap around? Just trying to see what is the proper way to keep from havi…
Last reply by Ridler, -
- 0 replies
- 908 views
http://www.vehiclewrapping.com/2015/07/lego-vehicle-wrap/
Last reply by TintMaster3000, -
- 0 replies
- 493 views
For anyone who owns and operates the L25500 printer. I notice some ink fadeout on edges of prints and such, after test plots and replacing printheads etc.. I found out it was the little rubber nipple that pressurizes the printheads! I twisted and turned them. Was printing great after that!! Now all of a sudden we're missing one! Hp wants $165 for the part number Q6651-60265. Anyone ran into this problem?
Last reply by tint_audiopros, -
- 14 replies
- 1.2k views
Okay, so I've been attempting to wrap my 2005 impreza rs interior with 3M carbon fiber vinyl. So far the top vent part and the two small vent covers turned out great, but I'm having issues with the center part, where the head unit and temp controls are. I've wrapped it once and in the of the area for the head unit I can't get the vinyl to stretch enough and stick. I'm thinking I'll have to do it in a couple of parts, but I'm not sure how to go about that. The only other issue I've run into are getting the very small button holes properly held down. I'd appreciate any advice you guys have for me.
Last reply by spectrum, -
- 0 replies
- 1.8k views
Collision magicians is proud to announce the arrival of Dent Light for iPad to the App Store! An app that helps users measure, photograph and repair hail size dents on the exterior panels of their vehicle. The Dent Light uses multi-coloured images to create a reflection on a panels surface area, highlighting the damage and helping the user with taking better pictures and/or accurately measuring dents for size classification in a hail matrix. Because the app mimics images used by expert paintless dent techs around the world owners of the Dent Light can "see what the pro's see" and be able to attempt their own dent repairs. The app also comes with a built-in hail matr…
Last reply by Collisiontec, -
- 0 replies
- 647 views
Hey everyone, I have a customer who loves the HX30S006B Metallic/Glitter Red Hexis Wrap but of course this one is discontinued and no longer available in Australia. (arghh!) https://instagr.in/t/hx30s006b%C2'> Just wanted to see if anyone could recommend any other cast vinyl wrap that has a great glitter/metallic finish which is available in Australia. (suitable for a boat wrap) I got a sample of 3M's 180C-203 Red Metallic (pretty dull compared to Hexis) Arlon's Red Dazzler Series 2000 is a bit too orange when the sun hits it. (it will clash with the red boat interior) I've tried googling but Im not sure of any other brands out there. thanks heaps.
Last reply by Tint_Receptionist, -
- 1 reply
- 1.3k views
Hi guys I know this has nothing to do with tinting but I offer Paintless dent removal training I have been in the industry over 10 years. I offer professional training in Canada mainly Alberta. I offer the training at your premises. This is not just a training program but more a ongoing support program..after initial training I offer 24hours support and more training for free after if needed after first initial training has been completed. This is for Hail damage vehicle repairs Minor dent repairs Plastic bumper dent repairs. Thanks guys if interested pls email at : pdrtrainingcentre@gmail.com
Last reply by TintTech, -
- 12 replies
- 1.7k views
My 1988 Toyota mr2 has a really awful paint job. Probably 50% of the cleercoat is gone and there's a lot of spray paint on it. Some areas have bondo covered up by spray paint. I want to wrap it with 3m 1080 series matte metalic blue vinyl wrap because I can't afford a paint job and I don't have the skills to paint it on my own. I have a friend who has done wrap before who is helping me do it. I am concerned that the vinyl won't adhere well to the cruddy paint it has now. Any suggestions as to how to get a good base for the vinyl without repainting it?
Last reply by WearTheFoxHat, -
- 0 replies
- 907 views
The History of Vehicle Wrapping
Last reply by TintMaster3000, -
- 0 replies
- 434 views
I am about to do some new graphic designs and I use to see a vehicle template program for sale. Do they still offer the program on disk? I see a lot of people selling online access but no disk.
Last reply by Twisted Tinter,
-
Sponsored by
.png)
-
Activity Stream
-
11
Can this be fixed? Wondering how this happens
thank you - great to know polishing should remove it. 🙏 I appreciate you and all the others who took the time to reply. -
11
Can this be fixed? Wondering how this happens
We've seen it on new vehicles, polishing it should remove it. Definitely not the shops fault. -
11
Can this be fixed? Wondering how this happens
no, aside from window cleaner I’ve not tried anything else yet like goo gone, a razerblade, etc… I’ll probably leave that to the detailer. question: when polishing glass will it impact the visibility after? I guess I’m now weighing between having them try to correct it or just leaving it be. -
-
1
Geoshield vs Maxpro
Global HP and Ceramic. Using it full time for seven years and not a single failure that wasn't my fault. -
6
Boat window tinting tips
Where can i get a white scrubbie at locally like stapels, home depot, etc. dont have one in my toolbox yet -
6
Boat window tinting tips
I start those at $750 and go up. Best advice is no cutting on the glass and white scrubbie only, no cleaning blades. That glass is super soft. You may want to use a film liner to make a template to cut your patterns. -
1
Geoshield vs Maxpro
Hi! I’m new to the tinting world. Just completed a 5 day tinting course and want to purchase some films to start my mobile tinting. We trained with Geosheild, but there was a lot of talk about Maxpro and how it was good as well. Does anyone have experience with both of these? Which one is better to work with and easier to shrink? Prices on both are pretty close to each other. Any advice would be greatly appreciated. thank you! -
11
Can this be fixed? Wondering how this happens
I have seen an acid do something similar to this…have you tried lightly using a razor blade or steel wool carefully? -
0
Looking For Experienced Tint/Audio Installer in DFW ASAP
Looking to Hire New Tint/ Audio Installer ASAP. We are an established shop Looking to Bring new life into our shop. Please call 972-271-1326 Ask for Amer.
-
