Rolls-Royce
9 topics in this forum
-
- 0 replies
- 638 views
Doors - These doors were pretty freaking hard. I didn't pull the panels (to scared to try haha). The front doors have a lot of space it has to get the film into on the sides and it's hard to get it there. back doors weren't too bad. BG - pretty easy to shrink and install. Overall Difficulty: 4/5 because those front doors are hell.
Last reply by isaiahdrums, -
- 8 replies
- 1.7k views
I have one coming in this week. Any electronics i need to be aware of? Thanks
Last reply by Reflect, -
- 5 replies
- 2.2k views
Yeah the front corner of the front doors was the only spot that took extra time. Other than that, pretty straight forward. Suntek Carbon 5
-
tinted a 2007 Phantom
by Guest maxwax- 0 replies
- 842 views
Not a real tough job, sort of gives you a seance of accomplishment to chalk a Rolls up as a job completed . .
-
- 0 replies
- 1.6k views
Have one tomorrow. Pics don't look exceptional but any info is great.
Last reply by The ///Man, -
- 12 replies
- 3.9k views
wasnt as easy as blackout mentioned. took a long time 2 hours total cuz all doors are lam and had to make some touchups atx30 all around
Last reply by VIP tint + glass, -
- 14 replies
- 10.1k views
I got a hold of this one the other day, same owner as the silver bentley continental. Just like tinting a big 745Li, except back windwo is easier. Phantom
-
- 14 replies
- 4.8k views
Nice and easy car. Front windows have pretty wide felt in the front corners by the mirrors, but with a little extra slip you can slide the film past the bottom felts almost like the panel is off.
Last reply by blackout66, -
rolls royce silver spirit 2
by Guest naughtydog- 2 replies
- 4k views
I have a guy wanting me to tint a rolls royce silver spirit 2 (1980 vintage) - had anybody ever done one so old?? I dont think I fancy that job Naughty
-
Sponsored by
.png)
-
Activity Stream
-
6
Low angle haze
I've got the ceramic 70 in a heat/light cube with the ceramic 30, HP30 and clear glass. That stuff is amazing, especially when you can see it side by side. I suspect it's two layers of ceramic base films laminated together to meter at 70vlt. I hope they never change it. Thanks @Bham. Believe it or not I really enjoy educating the customers to find out what they really need and not try to oversell just to turn a buck. Most of my new clients come from older referrals and when they find me I keep em for years. For sure more people are catching on to the product name and I've yet to have a piece of HP or the ceramic fail that wasn't my own fault. It's nice to know I'm not paying for a bunch of marketing collateral and a butt kissing salesman to travel around pass out tshirts and coffee cups that's added into the cost of my roll stock. -
6
Low angle haze
Lower haze when IRR is too high, will be potentiallly lead to cloud edges. -
6
Low angle haze
Im not that worried about brand recognition. Ive been getting work with Avery and its got little to no brand recognition as far as tint goes. I'm just looking for a good brand that I wont have an issue with. Avery is a fairly cheap option as far as Im aware, so I'm just getting ready to move into the big leagues with a more premium brand. Ive used STek's tint and I was pretty happy with the way it looked, shrank and the overall experience with customer service has been great too. I stopped using it because their specs feel like they are below par compared to the other premium brands. Specifically their TSER. Their NEX line seems to be compared to Xpel Prime XR Plus, but the specs were more on the line of Prime XR. Anyone know how that TSER number is calculated? Is it just a calculation combining light rejected, transmitted, reflected, etc? Looking into panaplex, autobahn, and global now. More specifically global because of recommendations.- 1
-
-
6
Low angle haze
I second the Global suggestion. If you can get past the color(khaki) of the 70% ceramic, it is the best performing film in their line. It has amazing heat rejection properties at a 70% film with very little low angle haze. I don't have anyone complain about it. If you install 50% on windshields then you will LOVE the Global 50% ceramic. One of the prettiest films i've dealt with and I would say "almost" zero low angle haze. It does not perform as well as the 70% in my opinion because they have almost the same "stats". @Dano Hang in there with the brand recognition. Just spit your knowledge and let them look it up if they want too. Global is my favorite of the "big 3" and the recognition is getting out there. -
0
Best place to learn window tint ppf
I am currently in the process of getting my detail business going in northern Alabama, and I feel that being able to add tint and ppf, would be a great addition and separate me from some other businesses. I have found a lot of these 2 day work shops, they range from 1 to 5 days, are any of them any good? I would assume the Xpel training etc would be quality, but I was hoping to find something a bit closer to home. I have no issue traveling but if I can find it here or like near Atlanta it would be a lot more convient. Any info on any of these class workshops would be appreciated, and if u got an idea I've overlooked. Let me know that as well,. Thx for the help fellas -
6
Low angle haze
I've had good results with the Global so far. No minimum requirements but also not much brand recognition in my area. -
6
Low angle haze
Basically, the technology that is blocking the heat is also creating the low-angle haze. Some films are worse than others, but they all have it. We've only had 2-3 customers complain about it in the last 10 years. So not a major issue at least for us.- 1
-
-
6
Low angle haze
I have been using Avery Dennison's NR Nano Ceramic IR but I keep seeing cloudy results or low-angle haze. I think some haze is acceptable as a trade-off for performance, but there are just some customers who may not be happy with the result. Does anyone know of a tint manufacturer that has little to no low-angle haze? Preferably one without a $10k minimum monthly buy-in or something crazy like that. Does this only affect ceramic tint? -
0
HIRING INSTALLERS - full time positions Vinyl Graphic Installers
Full-time vinyl graphics installer positions available. Please apply on our career site if interested: Careers - Adsposure | Advertising Vehicles Or contact mclayton@EST03.com via email for more information. Current location needs: -Cincinnati, Ohio -Chicago, Illinois -
0
Colorado Tint & PPF installer(s) needed!
We are a business with many different dealer accounts all throughout the Denver area and we are in need of another installer or two. We need guys with experience that are dependable, have an eye for detail & are capable of turning out high quality work. Unfortunately we are not looking to hire/train someone with little to no experience at this time. At the very least, we need someone who's capable & comfortable with doing basic 18" Clear Bra's (Hood, Fenders, Mirrors, Door edge/Door Cups) as well as 2 window match/full tints by themselves. There is plenty of work for at least 1 possibly 2 full time installers and the pay is good. To talk details or for more info please feel free to reach out and we can discuss further/set up an interview. 720-938-6822 Noah.shepard18@gmail.com
-
