DGI
Support Forum for DGI plotters
37 topics in this forum
-
- 0 replies
- 141 views
Hi Folks, Just been having trouble with cutting 4mil in a 36inch roll. The film wants to walk or not stay in line and will come out from the pinch rollers. Have also been cutting a 60inch roll with no problems. Would it be not enough pinch roller pressure? I would normally just hand cut it but I have a big job with all panels have handle cut outs in them.
Last reply by OlfaMan, -
DGI Om-100
by Josue- 1 reply
- 378 views
I have a problem with my DGI om-100, the problem is " stop to resize " and I don't know what parts need replacement ' somebody can help me or any idea about this
Last reply by Jake, -
- 4 replies
- 1.4k views
I'm trying to help a friend that has two OM-100 cutters, one is dead other when you try to cut the head moves back and forth and the roller moves the tint around like it wants to cut but the blade never goes down. Any suggestions? Also, anyone know where I can get a manual or better yet service manual for this unit? Thanks
Last reply by alberts316, -
- 1 reply
- 817 views
If anyone has a DGI 40" or 60". I'm interested in what you have. I would really like to find one with the revolving rack on the back
Last reply by A Plus, -
- 0 replies
- 721 views
Plotter for sale DGI Printer Model OM-150 Located: Orlando, FL Inquiries: email me at glassworksek@gmail.com
Last reply by A Plus, -
- 1 reply
- 1.4k views
FOR SALE IN TEXAS: 7 MONTH OLD DGI PLOTTER OMEGA SERIES MODEL OM 150 WILL SHIP ANYWHERE IN US. 3000.00 PLUS 250.00 FREIGHT CAN SEND PICS! CONTACT EMAIL way2loud@suddenlink.net
Last reply by oncewild, -
- 1 reply
- 1.2k views
I have a dgi om-100 and I need a new protection strip! I have been searching for quite awhile. Have not had very good luck at all! HELP YOU MUST!
Last reply by Ridler, -
need help with dgi-om100
by Guest dgi-user- 4 replies
- 5k views
need help with dgi-om100, i bought the cutter used but it did not come with a driver disc or instructions. do i need the driver installed on my windows vista computer for it to work? i have a trial version of signgo lite that i see supports this cutter. i use a serial to usb that came with the cutter(found the driver for this). i looked high and low for an instruction manual and driver even there website and came up with nothing. if anyone can help please chime in,thanks,Ray. email or post here ramon.iris@yahoo.com
-
How to cut large sizes
by Guest Rod- 1 reply
- 834 views
Does any one here knows how to cut large sizes on OM 130 cutting plotter, let's say 1 to 2 meter or more?
-
HELP
by Guest Rod- 1 reply
- 943 views
Cutting head of DGI OM 130 not going back to home position during size checking.
Last reply by ttccolumbia, -
Problem with DGI OM 130
by Guest Rod- 1 reply
- 935 views
I just would like to ask what could be the solution for the error coming out on OM 130 LCD displaying “UNABLE TO CHANGE WHILE PLOTTING”. Also when media size checking is in progress, the cutting head takes too long to go back to its home position. There is a communication between the software and the machine but once the operation is send, the cutting head is not performing the cut, but when manually move the media, the head starts to move but the cutting is not perfectly done. What could be the problem?
Last reply by Jake, -
- 5 replies
- 2.4k views
I just bought this plotter and need to buy blades for tint and the cut strips also. Any help is appreciated. jeff@thetintingspot.com
Last reply by Ridler, -
42" DGI omega plotter for sale
by Guest Xtreme- 0 replies
- 1.2k views
I have a 42" DGI omega plotter for sale, 6 months old, great condition, still has warranty email jen7995@ bellsouth .net if interested asking $3500 obo located in KY
-
- 1 reply
- 1.5k views
Anyone know where to get media take up reels for a DGI OM-150? Or do you have to fab something custom? Here is what I am looking for.
Last reply by tintmeister, -
dgi computercut om-150 for sale
by Guest tintec- 0 replies
- 1.2k views
for sale complete with stand and basket etc..will accept £1000ono bargain at this price
-
- 2 replies
- 2k views
I'm in need of another DGI plotter before long. Anyone interested in selling one they don't use or need any longer?
-
Help with 60" DGI plotter
by Guest just tints- 1 reply
- 1.6k views
Hey Guys, I have a 60" DGI Plotter, it will only cut 470mm across then it stops, How do I set it to be able to cut the whole way across, I want to cut some stuff off a 1220mm roll. Any help would be very much appreicated. Cheers
-
need help finding plotter blades for a DGI OM-100 !!
by Guest StreetShades510- 3 replies
- 2.6k views
does anyone know where i can find new blades and blade holder for a DGI OM-100 Plotter??
Last reply by Carmeltinting.com, -
- 3 replies
- 2.5k views
I have been cutting some small vinyl stickers for a customer and noticed that the cuts arnt so great, I figured if I got a new blade that the smaller fonts would come out better. I swapped the blades and tried adjusting the offset and force but with worse results then the previous blade. I then decided to switch back to the old blade and I still have these worse results. I can get the test cuts to a perfect square but the triangle in the middle is always messed up. Its like whenever there is an angle or curve, It gives me a squiggly, inconsistent cut. Does anyone have an idea of what this could be?
Last reply by tigerstripe, -
- 10 replies
- 4.7k views
I bought a used DGI plotter and Im looking to find some parts for it like a new cutting strip, blades, and a media rack that fits below the plotter. Im sure Bekaert will have them but will they sell to an average joe at a decent price?
Last reply by tintmeister, -
- 0 replies
- 2.2k views
3 Yrs Old DGI Omega Series OM-150 + Dell Latitude Laptop - Model PPO1L With stand 1530mm (60") cut table width • High Speed for High Productivity • 500 grams of Cutting Force • Guaranteed tracking • HP-GL Compatibility and Easy Control Panel High Speed for High Productivity 32 bit CPU and highly advanced servo control technology enable DGI Omega Series to cut straight lines and arcs as fast as 80CM/sec(31.5i).500 Grams of Cutting Force DGI Cutting Plotter series can cut various materials from normal vinyl to rubber mask clearly and accurately. The maximum cutting pressure of 500 grams and fine pressure adjustment allow cutting of hard materials such as high i…
Last reply by Solar Solutions NY, -
DGI Plotter Problem
by Guest DrivenDynamics.com- 9 replies
- 4.1k views
Guys, Need some help. We have a DGI OM-100 that just went out on us today. Basically, at power up it goes through the MEM tests, says its OK, then the screen goes blank and it just beeps over and over again. We tried pulling the power and letting it sit for a while but the same issue happens again when we flip it on. Any ideas would be very much appreicated? Thanks! Collin
Last reply by SuperSetKing, -
DGI 40 inch plotter
by Guest untouchable- 1 reply
- 2.9k views
A buddy of mine bought a DGI 40 inch plotter from some one about 3 years ago and never did any thing with it. Now he will sell it to me for a great price but he has never had any of the discs to load to the computer for set up. So may question is if I was to get a program like tint tek 2020 would I be able to just select this plotter and print or will I need some other software from DGI. Not sure if it matters but it does have a computer cut logo on it, so that is what it was being used with in the past. Thanks for any help, I have never set a plotter up before.
Last reply by watchdaride, -
40 " DGI Plotter 4 sale
by Guest CarolinaTINT- 5 replies
- 5k views
I am selling our 40" DGI plotter that we purchased from Bekeart about 2.5 years ago(We spent around $6000 with the year online membership). It was the best investment that my shop had made. I used it for tint, vinyl, and paint protection. It comes with a stand but we never used it. I made a table out of a large sliding door and mounted the plotter to it. The plotter also comes with the 3 roll holder on the back side of the plotter which is great to have. I still have the original box and paper work that was sent to us ( software and computer cuts book). The plotter was shipped by freight and not UPS or FedEX. I prefer pick up only. I would like $2500 obo. It is located …
Last reply by Carmeltinting.com, -
- 0 replies
- 2.8k views
3 Yrs Old DGI Omega Series OM-150 + Dell Latitude Laptop - Model PPO1L With stand 1530mm (60") cut table width • High Speed for High Productivity • 500 grams of Cutting Force • Guaranteed tracking • HP-GL Compatibility and Easy Control Panel High Speed for High Productivity 32 bit CPU and highly advanced servo control technology enable DGI Omega Series to cut straight lines and arcs as fast as 80CM/sec(31.5i).500 Grams of Cutting Force DGI Cutting Plotter series can cut various materials from normal vinyl to rubber mask clearly and accurately. The maximum cutting pressure of 500 grams and fine pressure adjustment allow cutting of hard materials such as high i…
Last reply by Solar Solutions NY, -
- 0 replies
- 2.1k views
3 Yrs Old DGI Omega Series OM-150 + Dell Latitude Laptop - Model PPO1L With stand 1530mm (60") cuttable width • High Speed for High Productivity • 500 grams of Cutting Force • Guaranteed tracking • HP-GL Compatibility and Easy Control Panel High Speed for High Productivity 32 bit CPU and highly advanced servo control technology enable DGI Omega Series to cut straight lines and arcs as fast as 80CM/sec(31.5i).500 Grams of Cutting Force DGI Cutting Plotter series can cut various materials from normal vinyl to rubber mask clearly and accurately. The maximum cutting pressure of 500 grams and fine pressure adjustment allow cutting of hard materials such as high in…
Last reply by Solar Solutions NY, -
- 0 replies
- 3k views
3 Yrs Old DGI Omega Series OM-150 + Dell Latitude Laptop - Model PPO1L With stand 1530mm (60") cuttable width • High Speed for High Productivity • 500 grams of Cutting Force • Guaranteed tracking • HP-GL Compatibility and Easy Control Panel High Speed for High Productivity 32 bit CPU and highly advanced servo control technology enable DGI Omega Series to cut straight lines and arcs as fast as 80CM/sec(31.5i).500 Grams of Cutting Force DGI Cutting Plotter series can cut various materials from normal vinyl to rubber mask clearly and accurately. The maximum cutting pressure of 500 grams and fine pressure adjustment allow cutting of hard materials such as high in…
Last reply by Solar Solutions NY, -
dgi plotter 1 2
by ljr1977- 13 replies
- 4.2k views
this was a job cut with computercut and Llumar was used in atr and p/p with 2 shades of both..... " I Love This Hobby of Mine "
Last reply by ljr1977, -
- 3 replies
- 2.3k views
Where would you get a tint blade for this plotter,at a good price.
-
- 23 replies
- 8.7k views
almost 2 year old dgi plotter for sale, I used it mainly to cut tint and paint protection and I closed my doors and am now doing mobile work and I just dont use the machine anymore, comes with tint catch and 3 roll holder, machine has worked great since day one and still works great...$3000, must be picked up, I have original box and manuals, any questions I can be reach at mrteak@optonline.net.....
-
40 dgi plotter 1 2
by Guest CarolinaTINT- 13 replies
- 4.1k views
I have 40" plotter that we bought in 05 for our 1st location. Since then I had opened a second shop and had to recently closed it down. I bought this plotter threw Bekeart Specialty. I think we spent $6000.00 for the whole package( 1 year of computer cuts, tint, and some paint protection). It was one of the best things we did for our business. I was able to pick up some graphics and paint protection for an addition for my business. At first I didnt want one because of the cost but I am happy with my decision. That's why I now own 2 of them. I need to get rid of the plotter. I will take reasonable offers. I had it posted recently for 2500.00. If you would like pics email m…
Last reply by alberts316, -
- 1 reply
- 1.9k views
this is a job that I edited with computercut and had more fun (laughing) at all the different options it gave us to choose from...moveing,mirroring and changing the size to make it scary, happy, mad all kinds of different options and this is what her choice was....
Last reply by ljr1977, -
- 1 reply
- 1.7k views
DGI PLOTTER 40" W/TRAY & 3 ROLL ATTACHMENT VERY LITTLE USE, WAS PURCHASED FOR 2ND LOCATION THAT NEVER GOT OFF THE GROUND. LOCATED IN FT. LAUDERDALE, FL. CAN PICKUP OR WILL SHIP FREIGHT COLLECT, YOUR CHOICE. THE VALUE IS THERE, ALL REASONABLE OFFERS WILL BE CONSIDERED. ORIGINAL BOX AND DOCS. EMAIL OR CALL 954-214-7032
-
- 29 replies
- 9.5k views
bought this about a year and a half ago, I just got into mobile tinting and I dont have a big enough van to put it in so I want to sell it, paid over 7k new, selling for $4500, will include a brand new roll of 18" clearshield paint protection film, it includes the catch system and the 3 roll holder... PICKUP ONLY, I have the original box for the plotter...any questions you can email me at mrteak@5starwindowtint.com........
Last reply by mrteak, -
NEED HELP WITH OM-100 DGI PLOTTER
by Guest warrantykiller04- 1 reply
- 2.2k views
Hi everyone, Im have recently gotten serious into window tinting, and I am on the path to open a business soon. I have tinted windows in the past freehand but I decided if I wanted to get the perfect cut, to go ahead and get a plotter, I also do graphics so I didnt just buy it for tint. I bought a 40" DGI plotter and I am having a little trouble configuring it exactly the way I need it for tint. 1. In the booklet, it says to let out all the tint you will need before you start plotting? Does this mean cut from the roll what "you think" your gonna use before you start plotting, or just roll it out and give it some slack?? 2. Which way does the roll sit on the bars?…
Last reply by autoez22, -
40 inch DGI plotter for sale
by Guest f4imatt- 2 replies
- 2.9k views
I have a DGI model OM-100 plotter from Bekaert. I have had it for about 6 months. Works good but I am kind of old school and prefer hand cutting. I am located in Kansas and can ship it or you can pick up. 6500.00 o.b.o.
Last reply by tigerstripe, -
60" DGI Plotter
by Guest solarguy- 3 replies
- 2.1k views
We just upgraded sign shop to do digital printing. Along with the digital printer we got an optical plotter so we don't need our OM-130 DGI plotter. We are selling the plotter. DOes anyone need one? It about 2.5 years old and its the one that Solargard sells as part of its computercut program. If you need one contact us at dale3132002@yahoo.com
-
Sponsored by
-
Activity Stream
-
1
What is the best value plotter to cut PPF and window tints?
FC8000/FC8600 new or used. Hard to wear em out. -
6
Auto window tint claims/performance question
Thank you for the explanation gentlemen. I definitely learned something new today. As a average consumer, say you pay for a specific type/brand of tint but after you get the car back, how does one knows that tint on the car is what you asked for? Thank you again. -
3
Help me pick?!
How long the shop has been around helps but the work they do is more telling. There are shops I know that have been "around" longer than I have but I was killing them in quality from the start. Here I am 24 years in. Go look at the work they do. -
6
Auto window tint claims/performance question
So you aren't measuring IR but a generic "solar heat". I've got the old analog btu meter and it was a cool tool but I don't use it and have not for probably 20 years. You are way overthinking this.- 1
-
-
10,092
The Off Topic Thread
Hey guys, correct if I'm wrong but isn't " V-Kool " a gimmick film. Apparently something about it reflects IR instead of absorbing it ?? Any knowledge on this film? -
0
How -tough- is the scratch coat
On a SUV, when u have it loaded up, and you know when something/somethings will touch the back glass (if tinted), I often throw a mover towels ontop as I have definately replaced rear tint in this due to it getting scratched.... Which got me thinking or over -thinking. Movers towel while not hard is not exactly soft... Do I need to throw a *soft* microfiber towel on it so if it rubs against the back glass, it won't scratch the tint. -
1
What is the best value plotter to cut PPF and window tints?
I just purchased a warehouse to open up a wrap shop to apply PPFs, window tints, and vinyl wraps to customer vehicles. What is the best value plotter to get? I want something that will be reliable, has a really good software that is easy to use and saves film, and something that would break the bank. Ive heard of brands like the Workhorse 2, Graphtec fc9000, and Jaguar V LX 72". What do you guys recommend?! Thank you so much for the help! -
0
Help me pick window tint!
Hi everyone, I need help picking the best window tint for my car. I want to get a ceramic film and have gotten few quotes. Now while comparing them it got me confused. Here are my options listed from most to least expensive. Xpel XR Autobahn Black Ceramic Llumar CTX or 3M Ceramic IR I am looking for perfomance and longevity. -
3
Help me pick?!
Xpel shop has been around for more than 15yrs Llumar and Autobahn one around 4 3m probably around 15+ too. But there was one review questioning the authenticity of film. So staying away from it. So probably out of Xpel, Llumar ans Autobahn -
3
Help me pick?!
High dollar quotes may be representative of; 1) high overhead costs or 2) wanting to stand out in a crowded field through a price illusion of having the best. Most all 'ceramic' films in the industry come within 5 or so percentage points of each other in terms of TSER. The amount of difference is trivial in comparison to overall performance, while occupying the car. Write each one down on a small piece of paper, put them in a bowl, and blindly pick one. Then, get an idea of what their workmanship looks like by visiting their shop, what the product might look like on your vehicle, and what might be their service history rating from online apps. Workmanship outweighs all other factors. I cannot pick for 'you'.
-
