USCutter
Support for USCutter Plotters
13 topics in this forum
-
- 0 replies
- 328 views
Hello everyone. This is my first time posting, but I have used TintDude as a resource for years. Just wondering if anyone is still using a Copam plotter. I bought this CP-3500 from USCutter about 10 years ago and it still works great for cutting vinyl. I have also used it in the past for cutting tint patterns and it did a fine job. If I remember right it was TintTek 20/20 software. The problem now is I don't know which software is compatible because the Copam brand is not listed anymore. On Monday I will call some companies to see if there is a generic driver that will work, but figured I would post in here to see if anyone have some helpful information. Thanks!
Last reply by JT3030, -
- 4 replies
- 3.9k views
Has anyone used a US Cutter Titan2 cutter? Their website says that this series is good for cutting tint. I know some people say "US Cutter is crap" but that probably has to do with which model cutter you bought. the have a buyers guide and the shows that some are not suitable for tint. Through research I have learned that US Cutter brands devices from various manufacturers. So all of their models aren't manufactured the same, meaning that just because the model you bought is crap doesn't automatically make the one I'm looking into crap as well (It very well could end up being a crap product, but not just because the one you bought from US Cutter didn't work for y…
Last reply by Jennah, -
- 2 replies
- 784 views
Can tint tek run off this vevor plotter, is this plotter good for someone who can hand cut and has never used a plotter.. How do you use these? Any ideas on something better but around the same price.. Help this poor guy out..
Last reply by Erockmx133, -
- 0 replies
- 956 views
Can someone advise if the Titan 3 53" works for window film? I'm seeing mixed reviews but no one with actual experience with it. Thanks y'all
Last reply by Tintanic, -
- 4 replies
- 2.2k views
So I finally broke down a got a plotter, albeit a cheap one. Expected it would give me some issues along the way but figured I’d at least get a piece or two cut before that happened. I bought this off someone local and the best I could tell it had never been used or even taken out of the box. But it definitely has an issue with the carriage, not sure if this is indicative of the cheapness or it was mishandled somewhere along the way. There is a grinding and vibration coming from the carriage whenever it tries to track left or right but it usually won’t move. Sometimes it does but it will go the opposite direction then what I’m telling it. If I pl…
Last reply by Tint Eastwood, -
USCutter - Buy at your own risk!
by Guest galantz28x- 8 replies
- 9.2k views
Buyer beware. This company is an F rating with the Better Business Bureau for a reason! They do not honor warranties on their cutters. Bought a ZenCut green plotter that was leaving horrible pinch roller marks in the film that did not go away once the film was applied. They then told me to use only the outside pinch rollers only, which ended up causing the film to bind up EVERY time. Then they told me to modify the springs of the pinch rollers. But apparently none of this falls under a "Warranty issue". So now I am stuck with this 4 month old plotter, 8 more months of TinTek software that I can no longer use, 5 roland blades, and about 10 50'x40" rolls of SunTek…
Last reply by ThymeParadox, -
- 1 reply
- 1.2k views
Does anyone know can this cutter cut tint? If so what is the recommended pressure? TIA
Last reply by jsylva, -
Titan3
by hankooks2k- 0 replies
- 1.2k views
Anybody have a Titan3 and using it currently with PPF or window films?
Last reply by hankooks2k, -
- 5 replies
- 3.1k views
Uscutter.com The SC and MH series. 50" cutters from 400 to 600 dollars. Seems super cheap compared to the 5k ones I was looking at. Trying to find out if either of these will work me though. I am jut starting out and won't be able to get serious for a few years due to my location. It will be a toy to play around with and I know "you get what you pay for" however all I want to know is can it cut window film and ppf? I would imagine it could since vinyl is thicker. Also can it interface with the more popular auto cutting software? Would like some unbiased responses before I talk to a sales rep. Thnks guys!
Last reply by southcentraltinting, -
Cutter cuts back to origin during run
by Guest mazz- 1 reply
- 1.4k views
I am a novice with my machine, a USCutter sc40 with FlexiSTARTER and have run into my first problem. Randomly during a cut it will return to the starting point then continue back to where it left off then continue on cutting. This wouldn't be a problem if it didn't cut the whole time it travels to the origin and back. It does it randomly at different points for the same pattern. Sometimes there is no problem at all. Why would it all of a sudden do this? Thanks in advance, Mike
Last reply by xstudiox, -
has anyone used USCUTTER LaserPoint 24???
by Guest pinoyheat551- 4 replies
- 4.1k views
Has anyone used USCUTTER LaserPoint 24 before? I want to cut window tints and paint protection films with this. Will this device suffice? I think they sell it online for 399.99.
Last reply by flat rock stan, -
- 1 reply
- 2.8k views
We have a UScutter CP-4050 for sale. Has probably no more than 50 single cuts on it. We bought it as a demo a little over a year ago. We primarily use Roland but at times like to see what else is available in the market. This cutter works well for vinyl and PPF. It cuts window film ok. It runs a little bit slower than a high end machine. This is due to it having stepper motors and not Digital Servo motors like you find in a Roland or Graphtech. They sell new from UScutter for $1499.99. Here is the link-UScutter CP Series cutters Selling for $1000.00 This includes everything you need to cut what ever media you desire, and is ready to cut. Two Year warranty From Octobe…
Last reply by SuperSetKing, -
- 13 replies
- 6k views
I know I have read that it cuts kinda slow and is somewhat loud but besides that, has anyone had real problems with these plotters such as mechanical faults? I got a place for the vinyl and all that but now will need to become a font hizzo and find a nice program so I can start creating some stuff. what software are most of you running and would you recommend using it or staying clear of it? im creating a table using a sliding glass door that will be framed about 3-4 feet off the ground with some bins underneath for scraps/trash and will have my computer mounted under there as well. anyone forsee a problem with the computer being underneath and also being that this wil…
Last reply by carolinatinter,
-
Sponsored by
.png)
-
Activity Stream
-
4
Low angle haze
Im not that worried about brand recognition. Ive been getting work with Avery and its got little to no brand recognition as far as tint goes. I'm just looking for a good brand that I wont have an issue with. Avery is a fairly cheap option as far as Im aware, so I'm just getting ready to move into the big leagues with a more premium brand. Ive used STek's tint and I was pretty happy with the way it looked, shrank and the overall experience with customer service has been great too. I stopped using it because their specs feel like they are below par compared to the other premium brands. Specifically their TSER. Their NEX line seems to be compared to Xpel Prime XR Plus, but the specs were more on the line of Prime XR. Anyone know how that TSER number is calculated? Is it just a calculation combining light rejected, transmitted, reflected, etc? Looking into panaplex, autobahn, and global now. More specifically global because of recommendations. -
4
Low angle haze
I second the Global suggestion. If you can get past the color(khaki) of the 70% ceramic, it is the best performing film in their line. It has amazing heat rejection properties at a 70% film with very little low angle haze. I don't have anyone complain about it. If you install 50% on windshields then you will LOVE the Global 50% ceramic. One of the prettiest films i've dealt with and I would say "almost" zero low angle haze. It does not perform as well as the 70% in my opinion because they have almost the same "stats". @Dano Hang in there with the brand recognition. Just spit your knowledge and let them look it up if they want too. Global is my favorite of the "big 3" and the recognition is getting out there. -
0
Best place to learn window tint ppf
I am currently in the process of getting my detail business going in northern Alabama, and I feel that being able to add tint and ppf, would be a great addition and separate me from some other businesses. I have found a lot of these 2 day work shops, they range from 1 to 5 days, are any of them any good? I would assume the Xpel training etc would be quality, but I was hoping to find something a bit closer to home. I have no issue traveling but if I can find it here or like near Atlanta it would be a lot more convient. Any info on any of these class workshops would be appreciated, and if u got an idea I've overlooked. Let me know that as well,. Thx for the help fellas -
4
Low angle haze
I've had good results with the Global so far. No minimum requirements but also not much brand recognition in my area. -
4
Low angle haze
Basically, the technology that is blocking the heat is also creating the low-angle haze. Some films are worse than others, but they all have it. We've only had 2-3 customers complain about it in the last 10 years. So not a major issue at least for us.- 1
-
-
4
Low angle haze
I have been using Avery Dennison's NR Nano Ceramic IR but I keep seeing cloudy results or low-angle haze. I think some haze is acceptable as a trade-off for performance, but there are just some customers who may not be happy with the result. Does anyone know of a tint manufacturer that has little to no low-angle haze? Preferably one without a $10k minimum monthly buy-in or something crazy like that. Does this only affect ceramic tint? -
0
HIRING INSTALLERS - full time positions Vinyl Graphic Installers
Full-time vinyl graphics installer positions available. Please apply on our career site if interested: Careers - Adsposure | Advertising Vehicles Or contact mclayton@EST03.com via email for more information. Current location needs: -Cincinnati, Ohio -Chicago, Illinois -
0
Colorado Tint & PPF installer(s) needed!
We are a business with many different dealer accounts all throughout the Denver area and we are in need of another installer or two. We need guys with experience that are dependable, have an eye for detail & are capable of turning out high quality work. Unfortunately we are not looking to hire/train someone with little to no experience at this time. At the very least, we need someone who's capable & comfortable with doing basic 18" Clear Bra's (Hood, Fenders, Mirrors, Door edge/Door Cups) as well as 2 window match/full tints by themselves. There is plenty of work for at least 1 possibly 2 full time installers and the pay is good. To talk details or for more info please feel free to reach out and we can discuss further/set up an interview. 720-938-6822 Noah.shepard18@gmail.com -
0
Tinter looking to relocate
20+year experience tinter and 12 volt installation looking to relocate farther south drug free dependable and used to fast pace working environment my profile is on indeed with qualifications and resume also available upon request feel free to contact me with any questions 865-409-8966- 20+years experience
- management experience
- (and 1 more)
-
-
