Anagraph
Support for Anagraph Plotters
18 topics in this forum
-
- 0 replies
- 248 views
anyone have a working anagraph or APD plotter for sale 40" ?
Last reply by watchdaride, -
- 0 replies
- 547 views
I'm getting an x axis error, I have tried to contact anagraph still waiting. anyone familiar with this machine?
Last reply by Pyramids, -
- 1 reply
- 501 views
have an 40" anagraph express plotter that worked great last time used. asking 200.00 OBO. located in Nashville Tn. 615-579-5424 or reply here in interested.
Last reply by Pyramids, -
- 3 replies
- 538 views
I have an ANA EXPRESS Elite Series AE101TF sitting in my shop that we don't use anymore. Would like to sale. Make me and offer and we will see what we can work out. I hate to just throw it in the dumpster when there is someone out there that can use it. Thanks.
Last reply by Rollie Sheppard, -
- 1 reply
- 1.2k views
I've been in the after market accessories business for twelve years. I'm adding window tint to my list of services. I'm hand cutting film now. I want to make sure I buy a good plotter. So far the Anagraph is the best deal I've got. Any experienced opinions on the machine would be great.
Last reply by Tintcutter, -
APD (Anagraph) 48" plotter 4 sale w/Ninja Cut Tint Patters Vol 1
by Guest AutoToyz305- 2 replies
- 2.2k views
I'm selling my 1 year old APD (Anagraph) 48" plotter and I'm including the complete set of window tint patterns by SAi (NinjaCut) Window Tint Patterns Vol 1. 857 window tint patterns for use in Flexi software More than 5,000 models years from over 40 manufacturers Ninja Cut works with Flexi and VE LXi. Contact me @ autotoyz305@gmail.com for details. I would offer shipping if the buyer covers the shipping costs (around $129) in the USA... $1400.00
-
- 9 replies
- 3.1k views
Having problems with my Anagraph not working with Precision Cut. I have the firmware installed but nothing happens when I go to cut a pattern. Precision Cut shows that the pattern was cut, but it seems like the information is not being sent to the plotter. Anyone have any suggestions?
Last reply by watchdaride, -
Problem when cutting with anagraph 40"
by Guest DecaslbyJT- 2 replies
- 1.8k views
Having trouble when sending cut jobs out from flexi..... Ive had the cutter forever and still runs great except for this annoying problem... I set up the plotter cut pressure and speed in the default settings.... I have it set for 100 pressure and 50 speed after sending the job it will cut for a minute or two and then automatically jump to 200 pressure and 75 speed..... I can reset it on the plotter panel and it will run a minute or two and then jump back to the highest settings.... the manual is LONG gone so not sure what to set up for the flow control.... should it be hardware? or Xon Xoff or None? If I pick hardware, which boxes should I have checked DTR, RTS,…
Last reply by watchdaride, -
Anagraph AE-101 48" Cutter for sale 1100.00 OBO
by Guest procutwindowtint- 1 reply
- 1.5k views
Great condition basket and upgraded rollers. Works great. $1100.00 OBO Is located in Yuma Arizona but will ship. Buyer to pay actual shipping costs. Also have Film Designs Software with 10 months left on subscription (as of this posting) will sell for $750.00 Package deal to get anyone started in the computer cutting window business $1600.00 for both. Plus shipping. Please email me kevin@gomobilenow.com or call 928-581-2777 Was going to start tinting but just have not had the time. Can email detailed pictures of the unit.
-
Where to get anagraph 101E cutter strip
by Guest DecaslbyJT- 0 replies
- 1.6k views
Where can I get parts for my anagraph.... have had it for a long time and is still working great..... looking to find a 40" teflon platten strip.... anyone know where I can buy one? thanks JT
-
- 3 replies
- 3.6k views
so i'm still shopping around for a plotter and a software... since i used madico i thought they used first cut for the software.. and i also i thought it would be easier if i asked our sales representative.. well to make long story short.. the sales rep didnt have no idea about first cut.. and they kept giving me different numbers to call.. so finally i came across with someone who is selling anagraph plotter and it comes with film design software.. what do you guys think about the plotter and the software???
Last reply by addicted to tint, -
- 14 replies
- 6.1k views
Doing research on these plotters and I am not finding alot of user experience-performance-complaints-raves or woahs. So if anyone has worked with them, give me your honest opinion. All I deal with are Roland dg,cx, gx.
Last reply by SuperSetKing, -
- 7 replies
- 2.2k views
Where you anagraph/APD users getting your blades from ? Been getting mine direct from Anagraph but the last few sort of sucked . I hear people are using 20' blades now .
Last reply by pierce8468, -
ANA AGRAPH EXPRESS ELITE CUTTER
by Guest L.A Tinters- 4 replies
- 7.1k views
I have a Ana Express Cutting Plotter and I need to know if any one knows where I can get the cutting strip that sit right under the blade
Last reply by watchdaride, -
- 1 reply
- 4k views
Anagraph ae-101e tint plotter for sale. Work perfect and never had to repair it . I am located in Orlando Fl but willing to ship to near state. Better to pick up so I can teach you all the tricks of cutting tint . Asking $1400 OBO . Email me with any questions hopk4457@cfl.rr.com
Last reply by watchdaride, -
ANAgraph problems
by Guest Luauna- 6 replies
- 2.8k views
Hello everyone, I'm a newbie to this forum. I am having some problems with my ANAgraph AE70 settings and was wondering if someone can help me. I run windows 98 with Flexi and ANAgraph. I've never had these problems before. Anyways, here goes. I always set my settings (pressure,speed)before plotting a job. Now, it dosen't matter what I set the settings to because it plots as fast as it can and with the highest pressure it can. It's doing this on its own. It's like it is ignoring my settings. I even tried setting it to the lowest pressure and setting the speed to the lowest setting and it still zooms through it while cutting the whole way through my vinyl. It just shredds …
Last reply by TINTDESIGNZ, -
problems with my Anagraph plotter
by Guest tintntunes1- 5 replies
- 2.4k views
I have an extra plotter that I bought and tried to get it set up for the last couple days. im thinking its the strip piece but not sure. I was wondering if someone that has the same plotter could give me the settings off theirs. it is cutting deeper in different areas. some all the way through and some not enough. thats why im thinking its the cutting strip but im not familiar with this plotter. ive always used the dgi solargard one with computercut. thats the software im using also with the anagraph. but ya, if anyone has the setting that would be greatly appreciated. also does anyone know where to buy the strips from or have a contact number for some place that handles …
-
- 5 replies
- 2.4k views
Our plotter is really messed up and I want to send it back to ANAGraph to see if they could "revamp" it. What is there home page or number?
Last reply by blade,
-
Sponsored by
.png)
-
Activity Stream
-
4
Low angle haze
Im not that worried about brand recognition. Ive been getting work with Avery and its got little to no brand recognition as far as tint goes. I'm just looking for a good brand that I wont have an issue with. Avery is a fairly cheap option as far as Im aware, so I'm just getting ready to move into the big leagues with a more premium brand. Ive used STek's tint and I was pretty happy with the way it looked, shrank and the overall experience with customer service has been great too. I stopped using it because their specs feel like they are below par compared to the other premium brands. Specifically their TSER. Their NEX line seems to be compared to Xpel Prime XR Plus, but the specs were more on the line of Prime XR. Anyone know how that TSER number is calculated? Is it just a calculation combining light rejected, transmitted, reflected, etc? Looking into panaplex, autobahn, and global now. More specifically global because of recommendations. -
4
Low angle haze
I second the Global suggestion. If you can get past the color(khaki) of the 70% ceramic, it is the best performing film in their line. It has amazing heat rejection properties at a 70% film with very little low angle haze. I don't have anyone complain about it. If you install 50% on windshields then you will LOVE the Global 50% ceramic. One of the prettiest films i've dealt with and I would say "almost" zero low angle haze. It does not perform as well as the 70% in my opinion because they have almost the same "stats". @Dano Hang in there with the brand recognition. Just spit your knowledge and let them look it up if they want too. Global is my favorite of the "big 3" and the recognition is getting out there. -
0
Best place to learn window tint ppf
I am currently in the process of getting my detail business going in northern Alabama, and I feel that being able to add tint and ppf, would be a great addition and separate me from some other businesses. I have found a lot of these 2 day work shops, they range from 1 to 5 days, are any of them any good? I would assume the Xpel training etc would be quality, but I was hoping to find something a bit closer to home. I have no issue traveling but if I can find it here or like near Atlanta it would be a lot more convient. Any info on any of these class workshops would be appreciated, and if u got an idea I've overlooked. Let me know that as well,. Thx for the help fellas -
4
Low angle haze
I've had good results with the Global so far. No minimum requirements but also not much brand recognition in my area. -
4
Low angle haze
Basically, the technology that is blocking the heat is also creating the low-angle haze. Some films are worse than others, but they all have it. We've only had 2-3 customers complain about it in the last 10 years. So not a major issue at least for us.- 1
-
-
4
Low angle haze
I have been using Avery Dennison's NR Nano Ceramic IR but I keep seeing cloudy results or low-angle haze. I think some haze is acceptable as a trade-off for performance, but there are just some customers who may not be happy with the result. Does anyone know of a tint manufacturer that has little to no low-angle haze? Preferably one without a $10k minimum monthly buy-in or something crazy like that. Does this only affect ceramic tint? -
0
HIRING INSTALLERS - full time positions Vinyl Graphic Installers
Full-time vinyl graphics installer positions available. Please apply on our career site if interested: Careers - Adsposure | Advertising Vehicles Or contact mclayton@EST03.com via email for more information. Current location needs: -Cincinnati, Ohio -Chicago, Illinois -
0
Colorado Tint & PPF installer(s) needed!
We are a business with many different dealer accounts all throughout the Denver area and we are in need of another installer or two. We need guys with experience that are dependable, have an eye for detail & are capable of turning out high quality work. Unfortunately we are not looking to hire/train someone with little to no experience at this time. At the very least, we need someone who's capable & comfortable with doing basic 18" Clear Bra's (Hood, Fenders, Mirrors, Door edge/Door Cups) as well as 2 window match/full tints by themselves. There is plenty of work for at least 1 possibly 2 full time installers and the pay is good. To talk details or for more info please feel free to reach out and we can discuss further/set up an interview. 720-938-6822 Noah.shepard18@gmail.com -
0
Tinter looking to relocate
20+year experience tinter and 12 volt installation looking to relocate farther south drug free dependable and used to fast pace working environment my profile is on indeed with qualifications and resume also available upon request feel free to contact me with any questions 865-409-8966- 20+years experience
- management experience
- (and 1 more)
-
-
