Range Rover
26 topics in this forum
-
- 1 follower
- 10 replies
- 1.6k views
Tinted this one couple months ago. The rear passenger glass looks like this. Different from other side. I guess it changes colour when it hit the sun ? Is that normal ceramic tint though.
Last reply by doctor4766, -
- 1 follower
- 1 reply
- 249 views
I recently tinted a 2023 range rover velar, I may have took the seal out a little bit too aggressive, when putting it back one of the clips isn't allowing the rubber back in ! I'm wondering if I'm just putting in wrong or it's absolutely broken and I need to replace it ! thanks
Last reply by pbalentine, -
- 2 followers
- 5 replies
- 249 views
So I recently had my crap wrapped. I asked for limo tint but the guy said it's already limo tint. I love my car but when the sun hits my windows I can't stand this difference help me!!!
Last reply by LeadfootCJ7, -
- 1 reply
- 807 views
Has anyone tinted one of these as yet? I had one the other day and the front door windows were as per the previous models but the rear doors were a different ball game all together. I removed the inner door handle screw pulled the top part of the door card away from the inner weather strip but could not remove the weather strip in its entirety as it was part of the window guide that sits around the channel. Some tinters say that you have to cut the inner weather strip at either ends to allow you to remove it separately but I was wondering if there was another way or better option without halving to cut this strip? Any feedback wo…
Last reply by sqeezee, -
- 3 replies
- 1.9k views
Just thought i'd post up about the New Velar, nothing to fear, no more dot matrix, door cards pull off from the top without removing (1 screw behind door lever)these are a lot tighter than the old ones though back window is a bit tight when making a pattern...
Last reply by no ma'am, -
- 27 replies
- 8.8k views
Got one booked in tomorrow. Have done a few of the normal Rangerovers but not the sports. Any problem areas I should be worried about or are they as straight forward as the normal Rangerovers? Thanks guys.
Last reply by BM-TINT, -
- 3 replies
- 13k views
I have one of these coming up tomorrow & in doin some research I found this. Pretty stinking sweet! See the link below: http://www.evoqueforums.net/forum/attachments/evoque-forum/651d1357262806-how-remove-5-door-exterior-door-handles-connect.jlrext.com_topix_service_procedure_223328_odyss.pdf
Last reply by hooli, -
- 6 replies
- 1.6k views
An Evoque is coming in on thursday. Side windows looks easy, but the overhanging rear spoiler seems to make some problem? Does the spoiler have to be removed? Any other tip on this car? Cheers
Last reply by BM-TINT, -
- 6 replies
- 3.1k views
Any info on trims etc would b great
Last reply by d11nc_r, -
Range Rover Evoque Guys?? 1 2
by Guest shadowline- 10 replies
- 3.9k views
OK had an enquiry on one of these cant believe its not in the makes and model section yet?!! Ok I know some or you UK guys have had them in, Malcom I guess and Matty may have done one? OK rear door cards are they like the others ie an odd screw and pull back the top of the door card or door cards off and the ones ive seen have a large spoiler over the back screen is that in the way or take it off? And any other tips???? TintDude feel free to move this in a while just wanted to target Euro guys or anyone thats had them in? Cheers fellas
-
- 9 replies
- 2.3k views
What films in your experience match the hue of the factory glass the best on the 2010 RangeRover???
Last reply by dubsesd, -
Range Rover off colour factory glass
by Guest landrover127- 0 replies
- 1.6k views
Iv had several customers complaning to me about there 80 grand car having different colour door glass to the rest i tell them its factory not an install but they won't have it. And to make things worse land rover say its ok im sorry but if i was spending that id go mad to. Does anybody else out there work for a dealer (land rover/range rover) and have spotted this just in the rangies not the sports
-
Are the roof windows on the Discovery tintable? I've tried with no luck... The last one I did, the guy went around town to see if they can be tinted other than painting or vinyl.
-
- 16 replies
- 4.8k views
Hi guys has anyone done a 1989 range rover as ive got one in tomorrow ? is there anything I should know ? is there a dot matrix round the rear side windows ? Any info would be great. Thanks all.
-
- 5 replies
- 2.3k views
Hi guys ive got a 02 Range Rover Vogue in this week anything I should know or are they as they look ? Ive done the older shape ones but not the newer shape ! Any info would be great Cheers guys
Last reply by lorenzotint, -
01 Range Rover 1 2 3
by Guest Rama- 23 replies
- 10.6k views
Have one sitting in the shop for tomorrow. Never tinted one of these and the owner has another that he wants to have done, along with his Denali and posssibly his Porsche boxer. (must suck to be rich) Has anyone done one of these, and are there any surprises? The owner want me to tint all the visible glass so it looks like it came from the factory, but the outside edge of the glass goes in about 3/4 of an inch from the inside felt/rubber. I'm sure I will figure it out, but some helpful hints would be good!! Thanks
-
New Range Rover Trim Problem NEED HELP!! & B/G Ins 1 2
by Guest chip01- 11 replies
- 7.4k views
Tinted one of the new range rovers last week, I pulled the panels at the top and removed the rubber gasket to install and put it back after installation, however on all of the door panels I have found that that where the panel meets the gasket there is a slight gap that was not there before, the panel is fully on and I have taken I completly off its on all of them so there must be a problem. I have got to sort it out cuz the customer is going off his head. Also, I had a few problems with the back window, even though it is really easy when I came to install the plastic moulding purtrudes and as you install it touches the film and you get contam. I didn't really want to …
-
Range Rover Sport Panels
by Guest protexfilms.com- 4 replies
- 3.4k views
Hi all, We've got a customer in 2moz and need to know how to take the door panels off as we havent done a new range before, and as it is a 59 plate we dont want to chance anything! Thanks in advance!!
-
2002 Range Rover
by Guest shadowline- 5 replies
- 3.1k views
Got a 2002 Range Rover boked in. Not had one of these in before had the model before, pulled the rear door panals, on those (no problems) and removed the upper internal rubber seal/gasket on the top of the doors. Where are the fixings for the rear door card on the 2002 model (havent looked at one close up), and does the upper internal seal pull off like the earlier one? Or can the film be slide in? Thanks Guys
-
hi, its a stab in the dark but have any of u guys got the patterns for the rear quarters for a range rover (coz I dont know how to remove them) and I know they will be a pain to cut to size ray
-
Range rover sport
by Guest Diamond Tints- 9 replies
- 6.2k views
Ok looking for something to go on the front of a sport with the dyed/manufacture tint on the rear now whats a good match for the front and not lu as its miles away so any other opinions please and not % wise before any wise comments as if it was for this would just use s,tek
-
Range Rover Sport
by Guest Tint Wiz- 4 replies
- 6.3k views
Done one on friday not to bad ,just tape off rear doors as the film can lick the felt seal,back 1/4 windows has 3 buttons for tv,radio,and phone ariels and they are close to each other
-
Doe anyone have pics of a new RangeRover 1 2 3
by Guest rangeroverny- 22 replies
- 10.9k views
I wanted to get my two front sides done on my Range rover but I'm in NY and 70% is the limit. I'm thinking about pushing 50% or lighter. I just didn't want to spend my money and get 70% and it ends up looking like a clear window on the car. Thanks in advance.
-
24 INCH RIMS....DO THEY FIT?
by Guest NPC169- 0 replies
- 5.9k views
Does any one know if 24s fit on an 04 RANGE. Do I need any mods in suspersion?
-
New Model
by Guest Angles- 5 replies
- 4.9k views
Hello folks I am pretty new to Car window tinting, mostly I have just done Flat glass, rears on light commercials etc, I have a customer who wants his new shape Rangerover doing, he is already a customer of mine for Signs and Graphics and I would like to keep him happy. I have been in the business of applying pressure sensitive vinyl for over 15 years now without any major problems and very high customer satisfaction, I started selling window films mainly the clear shatter resist type in 95, and have fitted these and black out/privacy films to various large plate glass windows, I also do a lot of window graphics, I know about various techniques for application and own a…
Last reply by Protint, -
Range Rover - The one before the new shape
by Guest DapaaTints- 1 reply
- 4.5k views
I have got one to do - having had a look at one the side gaskets on the roll downs look big and tight and it looks difficult to slide the film all the way into the gasket and hide the edges - any ideas thougts would be appreciated. Cheers
-
Sponsored by
.png)
-
Activity Stream
-
4
Low angle haze
Im not that worried about brand recognition. Ive been getting work with Avery and its got little to no brand recognition as far as tint goes. I'm just looking for a good brand that I wont have an issue with. Avery is a fairly cheap option as far as Im aware, so I'm just getting ready to move into the big leagues with a more premium brand. Ive used STek's tint and I was pretty happy with the way it looked, shrank and the overall experience with customer service has been great too. I stopped using it because their specs feel like they are below par compared to the other premium brands. Specifically their TSER. Their NEX line seems to be compared to Xpel Prime XR Plus, but the specs were more on the line of Prime XR. Anyone know how that TSER number is calculated? Is it just a calculation combining light rejected, transmitted, reflected, etc? Looking into panaplex, autobahn, and global now. More specifically global because of recommendations.- 1
-
-
4
Low angle haze
I second the Global suggestion. If you can get past the color(khaki) of the 70% ceramic, it is the best performing film in their line. It has amazing heat rejection properties at a 70% film with very little low angle haze. I don't have anyone complain about it. If you install 50% on windshields then you will LOVE the Global 50% ceramic. One of the prettiest films i've dealt with and I would say "almost" zero low angle haze. It does not perform as well as the 70% in my opinion because they have almost the same "stats". @Dano Hang in there with the brand recognition. Just spit your knowledge and let them look it up if they want too. Global is my favorite of the "big 3" and the recognition is getting out there. -
0
Best place to learn window tint ppf
I am currently in the process of getting my detail business going in northern Alabama, and I feel that being able to add tint and ppf, would be a great addition and separate me from some other businesses. I have found a lot of these 2 day work shops, they range from 1 to 5 days, are any of them any good? I would assume the Xpel training etc would be quality, but I was hoping to find something a bit closer to home. I have no issue traveling but if I can find it here or like near Atlanta it would be a lot more convient. Any info on any of these class workshops would be appreciated, and if u got an idea I've overlooked. Let me know that as well,. Thx for the help fellas -
4
Low angle haze
I've had good results with the Global so far. No minimum requirements but also not much brand recognition in my area. -
4
Low angle haze
Basically, the technology that is blocking the heat is also creating the low-angle haze. Some films are worse than others, but they all have it. We've only had 2-3 customers complain about it in the last 10 years. So not a major issue at least for us.- 1
-
-
4
Low angle haze
I have been using Avery Dennison's NR Nano Ceramic IR but I keep seeing cloudy results or low-angle haze. I think some haze is acceptable as a trade-off for performance, but there are just some customers who may not be happy with the result. Does anyone know of a tint manufacturer that has little to no low-angle haze? Preferably one without a $10k minimum monthly buy-in or something crazy like that. Does this only affect ceramic tint? -
0
HIRING INSTALLERS - full time positions Vinyl Graphic Installers
Full-time vinyl graphics installer positions available. Please apply on our career site if interested: Careers - Adsposure | Advertising Vehicles Or contact mclayton@EST03.com via email for more information. Current location needs: -Cincinnati, Ohio -Chicago, Illinois -
0
Colorado Tint & PPF installer(s) needed!
We are a business with many different dealer accounts all throughout the Denver area and we are in need of another installer or two. We need guys with experience that are dependable, have an eye for detail & are capable of turning out high quality work. Unfortunately we are not looking to hire/train someone with little to no experience at this time. At the very least, we need someone who's capable & comfortable with doing basic 18" Clear Bra's (Hood, Fenders, Mirrors, Door edge/Door Cups) as well as 2 window match/full tints by themselves. There is plenty of work for at least 1 possibly 2 full time installers and the pay is good. To talk details or for more info please feel free to reach out and we can discuss further/set up an interview. 720-938-6822 Noah.shepard18@gmail.com -
0
Tinter looking to relocate
20+year experience tinter and 12 volt installation looking to relocate farther south drug free dependable and used to fast pace working environment my profile is on indeed with qualifications and resume also available upon request feel free to contact me with any questions 865-409-8966- 20+years experience
- management experience
- (and 1 more)
-
-
