White cards for cutting

[TintDude]

When you have a car with a dark interior, or a rear deck that is obscuring your light, making it difficult to see the frit line when making your final cuts on the rear window, you can use these cards to help you see:

They are just white poster board paper that have been laminated to keep them dry and rigid.

Before you start cutting, tuck these all along the bottom of the rear window on the inside. This will help you see the frit line and make it much easier to see what you are doing.

Hope this helps someone.

[Guest Tinted]

Good idea thx never thought of that!

[hoosierwindowtek]

I was just figuring out the same thing recently... only I used a piece of white corrugated plastic. It's the type used a lot by sign makers.

[tigerstripe]

Ive always used a bath towel, but Ill have to tey that, thanks td, you should get a totw

[TINTDESIGNZ]

I use a large piece of white plastic and a drop light -but that is a great idea-I'll give it a try!

[Guest cadillacstars]

Very nice. I always use a light, but I'll have to try this. Thanks

[TITAN500]

good tip. I used a hijacked dealer licencse plate add

(the back side) yesterday.. you can also cut those plastic license adds into triangles for surer thin squegees for tight seals.

[TITAN500]

BTW TD nice Contrails on your avatar

[Guest metint]

[BIG E]

Have a couple on me for that TD!