HELP AGAIN....

[Guest willie]

Hey willie-you still soapin those truck back glass?

[BIG E]

Hey willie-you still soapin those truck back glass?

[Guest drejc]

Thank you for your answers. I have another question. On what temperature I must heat the film with heat gun when I shrink the rear window outside and what temperature when the film is instaled in the inside if is some fingers left there?

[Guest 1PEECBARETTA]

warm to the touch on the outside,more importantly, use your best judgment

[Guest tint rookie]

gun on high, control temp by bringing closer to the glass.

for fingers, on high, 3-4" from glass, 8 count first try, if it dont lay down maybe add a 3 count.

[Kemble]

Sounds to me like you melted the edges a bit? After you shrink-go back and trim shriveled edges!

Sounds like it to me, I've done that a few times before.

[Guest drejc]

I have a heat gun with temperature from 0 C to 650 C. On wich temperature of C shoud I set my heat gun to shrink the rear window?

Thanks for the answers.

[Guest 1PEECBARETTA]

w.f.o. 650

[Guest S and S]

I thought he was talking about it curling up inside and not sticking -not outside

he is!! Still overshrinking can cause that!