Jump to content

Huge Asteroid to Fly Past Earth July 3

TintDude

Recommended Posts

TintDude

TintDude

Posted
Posted

http://news.yahoo.com/s/space/20060626/sc_...ypastearthjuly3

Joe Rao

SPACE.com Skywatching Columnist

SPACE.com Mon Jun 26, 1:00 PM ET

An asteroid possibly as large as a half-mile or more in diameter is rapidly approaching the Earth. There is no need for concern, for no collision is in the offing, but the space rock will make an exceptionally close approach to our planet early on Monday, July 3, passing just beyond the Moon's average distance from Earth.

Astronomers will attempt to get a more accurate assessment of the asteroid's size by ?pinging? it with radar.

And skywatchers with good telescopes and some experience just might be able to get a glimpse of this cosmic rock as it streaks rapidly past our planet in the wee hours Monday. The closest approach occurs late Sunday for U.S. West Coast skywatchers.

The asteroid, designated 2004 XP14, was discovered on Dec. 10, 2004 by the Lincoln Laboratory Near Earth Asteroid Research (LINEAR), a continuing camera survey to keep watch for asteroids that may pass uncomfortably close to Earth.

Although initially there were concerns that this asteroid might possibly impact Earth later this century and thus merit special monitoring, further analysis of its orbit has since ruled out any such collision, at least in the foreseeable future.

Size not known

Asteroid 2004 XP14 is a member of a class of asteroids known as Apollo, which have Earth-crossing orbits. The name comes from 1862 Apollo, the first asteroid of this group to be discovered. There are now 1,989 known Apollos.

The size of 2004 XP 14 is not precisely known. But based on its brightness, the diameter is believed to be somewhere in the range of 1,345 to 3,018-feet (410 to 920 meters). That's between a quarter mile and just over a half-mile wide.

Due to the proximity of its orbit to Earth [Map] and its estimated size, this object has been classified as a ?Potentially Hazardous Asteroid? (PNA) by the Minor Planet Center in Cambridge, Massachusetts. There are currently 783 PNAs.

The latest calculations show that 2004 XP14 will pass closest to Earth at 04:25 UT on July 3 (12:25 a.m. EDT or 9:25 p.m. PDT on July 2). The asteroid's distance from Earth at that moment will be 268,624-miles (432,308 km), or just 1.1 times the Moon's average distance from Earth.

Spotting 2004 XP14 will be a challenge, best accomplished by seasoned observers with moderate-sized telescopes.

On April 13, 2029, observers in Asia and North Africa will have a chance to see another asteroid, but without needing a telescope. Asteroid 99942 Apophis, about 1,000 feet (300 meters) wide, is expected to be visible to the n@ked eye as it passes within 20,000 miles (32,000 km). Astronomers say an asteroid that large comes that close about once every 1,500 years.

Observing plans

As 2004 XP14 makes its closest approach to Earth, astronomers will attempt to gauge its size and shape by analysis of very high frequency radio waves reflected from its surface.

Such radar measurements of the exact distance and velocity of the asteroid will allow for precise information on its orbit. From this scientists can also discern details of the asteroid's mass, as well as a measurement of its density, which is a very important indicator of its overall composition and internal structure.

Astronomers plan to utilize

NASA's 70-meter (230-foot) diameter Goldstone radar, the largest and most sensitive antenna in its Deep Space Network. Located in California's Mojave Desert, the Goldstone antenna has been used to bounce radio signals off other Near-Earth asteroids many times before, and it is now being readied to ?ping? 2004 XP14 on July 3, 4 and 5.

Augmenting the Goldstone observations will be radar observations scheduled at Evpatoria in the Ukraine, commencing several hours prior to the July 3 observations at Goldstone.

Editor's Note: A SPACE.com viewer's guide for 2004 XP14 will be presented in Joe Rao's weekly Night Sky column on Friday, June 30.

Link to comment
Share on other sites
TINTZEUS

TINTZEUS

Posted
Posted

scary thought? :lol

makes me want to make every day a good one . :lol

be nice. meet new people. talk with friends and family. have fun......... :thumb

SLAP some tint...... :lol

cus its all fun and games until something slams into us............ :rollin

its so wierd ...so where n the #%@* are we anyway.?? :lol

I wonder if the MAN would tell us? :lol

Link to comment
Share on other sites
Guest Braud Spectrum

Guest Braud Spectrum

Posted
Posted
I agree :DD make the best of the life you have!

I have decided to take Conversational Spanish. My class starts 8-29 :DD I think it will be fun and I will learn something new!

:DD Great idea TTC. I grew up in San Antonio and realized I know quite a bit more than I thought (not counting the bad words :DD ) when my renter moved upstairs. I've been taking advantage of our living situation and having him teach me a spanish word or phrase each week when he pays me his little denero.

Link to comment
Share on other sites
Guest willie

Guest willie

Posted
Posted

I agree :DD make the best of the life you have!

I have decided to take Conversational Spanish. My class starts 8-29 :DD I think it will be fun and I will learn something new!

:DD Great idea TTC. I grew up in San Antonio and realized I know quite a bit more than I thought (not counting the bad words :DD ) when my renter moved upstairs. I've been taking advantage of our living situation and having him teach me a spanish word or phrase each week when he pays me his little denero.

:DD

Yo sewage are you still living in SA -we are coming there in a few weeks for vacation

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

    ride wrap

    Conco

    Lexen

  • Activity Stream

    1. 7

      Air80 vs Stratos70 Windshield

      Since there is no limit of darkness on the top strip, I have wanted to tint it. But I would go very dark, to help with sun glare in the evening.
      mikenot in Window Tinting - General Discussion
    2. 7

      Air80 vs Stratos70 Windshield

      Yeah that’s a very fair point to a degree I’m probably overthinking it. I don’t see really significant glare reduction until you get into much darker tint. Like you I think visibility for me is more important living in the country. I’ll probably see what the specs list the differences between 70% and 80% and then double check with the tinter as to what they recommend. Likely will end up with 70% with a strip along the top. Air80 seems to be much more popular, not sure if it’s due to performance or the difference in cost being so much more for the stratos. thank you
      joshiemcduck in Window Tinting - General Discussion
    3. 0

      Process

      Hey guys - so I work for a vinyl graphics company that is adding window tinting to their repertoire and I had a question about your guys' ideal process. I have my plotter set up and my window tinting software ready to go, but I am completely ignorant about the way that tint installers prefer that things be cut. Currently, I will plot/weed the tint and cut the backing away as much as I dare before handing it over to the installer. I was thinking that the installer would prefer the tint to be cut to shape which I believe I can achieve with the perf cut on my plotter. Is that the typical process or should I not be worried so much about it being cut to exact shape?
      DonMeads in Plotters and Cutting Systems
    4. 7

      Air80 vs Stratos70 Windshield

      Im in TX, plenty of of what you mentioned. While I do sit higher in an SUV, glare reduction is not improved much at all with what I have. My 80% is almost clear, not dark at all. With all tint, it adds a bit of reflectivity from the outside, which I notice makes it slightly harder to see from the outside looking in, in the form of a glare not darkness. At the end of the day, it's not permanent, it's only money!
      mikenot in Window Tinting - General Discussion
    5. 0

      PPF installer for hire in SoCAL

      Hello. My name is Adrian i have good experience with paint protection film and i just moved to California, Irvine, i'm open to travel one hour away for the right job. You can contact me at 5717330693
      adrianpaun in Classifieds • Employment • Marketplace
    6. 11

      Boat window tinting tips

      or "bust out another thousand"
      TintDude in Window Tinting - General Discussion
    7. 11

      Boat window tinting tips

      Best tip would be, “Sorry, no boats”.
      pbalentine in Window Tinting - General Discussion
    8. 11

      Boat window tinting tips

      The answer is to not heat that area too much so that you leave some slack in the film for when you get it to the inside. Also cut your pattern a little large so that you can trim a thread off the edges after shrinking to not have a furled edge. After you do a few of those you'll figure out how much to leave/trim to not have any light gaps. Also I'll leave a hardcard wrapped in a microfiber in the bottom overnight to collect water and keep pressure on the film while it dries. Sometimes you can take the top rail off the glass if the jackwagon boat builder didn't put too much pressure on the glass package when it was installed. If you pull the rail off of a tight package it's a pita to get back on, looking like it could crack the whole time. Congrats on getting it done. I've seen plenty that couldn't, which is why I price them like I do.
      Dano in Window Tinting - General Discussion
    9. 11

      Boat window tinting tips

      Thx everyone for the tips the install went fine, however i did run into a new problem on the main curve of the glass from thr outside the tint would lay flat on the big curve but when applying it seemed like there was too much tension and it would not stay down i ended up heating it up and flattening down but some of that area got overheated and warped a little, if you know how to tackle this problem please help me thank you!
      Lauty in Window Tinting - General Discussion
    10. 6

      Removable rigid window tint sheets - WTF?

      civicrice in Window Tinting - General Discussion
×
×
  • Create New...