CTS Rear Tray Removal

[Guest Kevinmatthew]

Could anyone give me a run down on the removal on the 03 CTS... so far I have ripped the part you sit on out and removed the 4 15mm nuts. Now the part I can't figure on is the back seat itself?

[Guest Kevinmatthew]

Let me clarify, The back seats fold forward and behind them is a strip of metal that looks like it is welded down, I don't really know, but the rear tray is down behind this metal strip?

[Guest Kevinmatthew]

Kevin you dumbass.. that metal strip is not welded on there are a few nuts on the trunk side to remove. Then the strip will come off along with the back seat.

Oh ok thanks for the tip.

[Guest willie]

looks like you figured it out

I dont pull the rear trays, just carefully slide the tint down and it will go

[TINTZEUS]

[Guest 1PEECBARETTA]

does this guy have multiple personality disorder or sumpim?

[Guest Beeline]

the last one I did, I didn't remove anything. don't cut it so big on the bottom.

[Guest Kevinmatthew]

10-4

[Guest tintman AZ]

Glad we could help, Kev-Man. Actually I don't know if I've done one, but if the carpet touches the clear part of the glass I'm sure I would try to remove it too.

[finishlineautosports]

Just did an 07, piece of cake to remove. Like mentioned, a few nuts on the back side of that bar is all it takes. Then pop the seat out and remove tray. Seriously adds about 10-15min tops to entire install. Cake car.