Jump to content

2000 Chevy Tracker Keyless

RICHat22

Recommended Posts

RICHat22

RICHat22

Posted
Posted

I had a customer call about adding power locks and keyless entry to a 2000 4dr Tracker. Does anyone know of a kit for this? If I remember right it has the lock motor in the door latch and is cable operated all over. I checked the catalog and to order parts you order the latch with or w/o power locks. Last one of these I did was a Chevy colorado and it was a nightmare and only did it to fix another hack install someone else f'd up that had gone out of business.

Is there anything aftermarket to add power locks ? Have I forgotten any options other then sell them a new car or $1000 worth of GM parts? :beer

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    tintwiz

    signwarehouse

    tinttek

    martinmetalwork.com

    filmvinyldesigns

    ride wrap

  • Activity Stream

    1. 1

      3M ceramic ir vs. LLumar Pinnacle

      Go with the shop you feel will give you the best installation/service. Both films are high-quality, and performance is on the same level. So either way, you can't lose. If you go with 3M CMIR 35%, have the shop confirm it will meter legal. Depending on the % of your stock glass, it could vary by 1-2%, which could be enough to meter too low. Personally, I love 3M CMIR as it is a great-looking film. Except for one, every vehicle in my family has it installed.
      DynamicATL in Window Tinting - General Discussion
    2. 1

      3M ceramic ir vs. LLumar Pinnacle

      Hello! I am looking to get all of my windows tinted (minus the windshield) in my Mazda CX-5. I got a few quotes from some shops and need to decide which one to get. Shop 1: $419 ceramic ir Shop 2: $480 for LLumar F1 Pinnacle I would prefer the LLumar one, as it is 40% and not 35% like the ceramic ir due to me having to pass inspections in NC. I have also heard that LLumar tends to be better quality, but some people swear by 3M. I think it’s mainly preference, but correct me if I’m wrong. On paper the 3M looks better, but the shop that is selling LLumar says theirs is slightly better so I could be looking at the wrong numbers. They also sell the CTX for $420, but that’s worse than the 3M ceramic ir. Help me decide lol.
      Raleighman223 in Window Tinting - General Discussion
    3. 1

      XPEL WINDOW TINT shrinking

      It happens from time to time, usually when you don't have enough soap or there's a spot that's not quite dry and the film grabs the glass. It's super easy to crease when that happens, I usually just lift it and let it settle back down to reset and then continue on. Gotta be careful not to overshrink it too.
      highplains in Window Tinting - General Discussion
    4. 10,324

      The Off Topic Thread

      Evening everyone It's been daily monsoons up here, really makes me wonder what the rest of the summer is going to be like Y'all are scaring me with this shit, I'm still in my mid/late 30's and already have a hell of a time in the morning
      highplains in Off Topic
    5. 0

      Now Hiring experienced Tinters and Wrap Techs In the heart of Atlanta.

      Great Pay and busy location. Contact Mike at 678-245-0748. I am also looking for a tint instructor with over 8 years of experience. I look forward to hearing from you. Come join the winning team.
      Mike Cutt in Classifieds • Employment • Marketplace
    6. 1

      IR Specs

      There are people way smarter than me but I'll sling a guess out there that what you are experiencing is the difference between IR and R factors. Window tint blocks(absorbs/reflects) UV and IR parts of the heat spectrum, BUT window tint does not have an " R factor " like the pink stuff in your attic. It takes mass to create an " R " factor. The shade is designed to reduce heat and also has the mass to create more of R factor in heat rejection and I am assuming that is the difference you are feeling.
      Bham in Window Tinting - General Discussion
    7. 1

      IR Specs

      Rear glass comes factory dyed. It has XR Plus 70% on it In looking at the IR specs... 92 vs 97% etc, not much of a differential of 5% Riddle me this Sitting in the backseat - I raised up the rear window shade. I did feel a difference in -less- heat with the window shade. The window shade is not solid but is semi perforated ? Is it due to an extra -layer- past the window. It wasn't on my radar as it does reduce the -feel of heat- from the sun shining on the window. Here I was thinking the IR 92% was a pretty decent spec in itself but the rear shade does add (less heat feel) for sure. I'm sure someone on TD has a better technical answer for my WIKI
      mobiledynamics in Window Tinting - General Discussion
    8. 10,324

      The Off Topic Thread

      I hear ya bro.
      TintDude in Off Topic
    9. 10,324

      The Off Topic Thread

      Feeling it today. That getting old thing hitting hard. Love sleeping but hate waking up. Hurts to wake up. Plantar Fasciitis is really bad today. Hurts to walk around on this hard floor.
      Bham in Off Topic
    10. 10,324

      The Off Topic Thread

      Howdy
      TintDude in Off Topic
×
×
  • Create New...