Jump to content

CLEAR-PLEX

TINTZEUS

Recommended Posts

  • Replies 121
  • Created
  • Last Reply
TINTZEUS

TINTZEUS

Posted
  • Author
Posted
ok so how long did it take you to shrink the shti to the window? one heat gun or dual? new windsheild? and if so you should talk to the local glass shop and everytime they sell a knew windsheild to tell the customers that you are putting on a clear film to help avoid against damaging new windshilds?

took 10 minutes -15 maybe to shrink...with 1 heat gun and It was a new shield.

:dunno

Link to comment
Share on other sites
TINTZEUS

TINTZEUS

Posted
  • Author
Posted
Tintzeus, we got a sample today, were in the Uk, so I agreed with the rep, that we will try it on our new van for 6months, to see what happens, we are a glass replacement company, and im doubtfull it will last long here in the Uk climate, but if it does the implications will be good, with high end car dealerships wanting a new extra to offer the customer, also the rep from madico told me the aproached several tint companys here in the Uk about a year ago and there was little if no interest, I never heard of clear-plex before your post so many thanks.

cool hope you got the DVD on how to install....It's that eazy....check out the 3 mexicans in the background tinting the jetta :dunno

I'm happy with mine so far....even sprayed DE-ICER on it today to see if it would stain...no stain.

Just try to be sure to use alot of pressure getting the water out, so there are little to no bubbles.....try to take you time.

my shield is almost clear I only have like 3 spots left.

Good Luck

:thumb

Link to comment
Share on other sites
Guest CJ Shades

Guest CJ Shades

Posted
Posted

I knew it would look good installed. The REAL question is how long does it last. The chic from Tintcentre bragged about it big time for about a week and then disappeared. Keep us posted as to how the warranty goes and how the filme works up.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

    ride wrap

    Conco

    Lexen

  • Activity Stream

    1. 7

      Removable rigid window tint sheets - WTF?

      I created an account just to respond here. I'm not a "tinter" or whatever yall may call yourselves but I came across this product and thought that it looked pretty cool and something I could do myself. I ordered from Lazeway and spent like $150 for two packages. The product is from China although they claim all this America stuff on the website. All i received was two simple rolls of tint, nothing special. I was totally scammed and now I'm looking all over the internet for anyone talking about this product to let them know. Dont buy from them.
      Mario L in Window Tinting - General Discussion
    2. 7

      Air80 vs Stratos70 Windshield

      Since there is no limit of darkness on the top strip, I have wanted to tint it. But I would go very dark, to help with sun glare in the evening.
      mikenot in Window Tinting - General Discussion
    3. 7

      Air80 vs Stratos70 Windshield

      Yeah that’s a very fair point to a degree I’m probably overthinking it. I don’t see really significant glare reduction until you get into much darker tint. Like you I think visibility for me is more important living in the country. I’ll probably see what the specs list the differences between 70% and 80% and then double check with the tinter as to what they recommend. Likely will end up with 70% with a strip along the top. Air80 seems to be much more popular, not sure if it’s due to performance or the difference in cost being so much more for the stratos. thank you
      joshiemcduck in Window Tinting - General Discussion
    4. 0

      Process

      Hey guys - so I work for a vinyl graphics company that is adding window tinting to their repertoire and I had a question about your guys' ideal process. I have my plotter set up and my window tinting software ready to go, but I am completely ignorant about the way that tint installers prefer that things be cut. Currently, I will plot/weed the tint and cut the backing away as much as I dare before handing it over to the installer. I was thinking that the installer would prefer the tint to be cut to shape which I believe I can achieve with the perf cut on my plotter. Is that the typical process or should I not be worried so much about it being cut to exact shape?
      DonMeads in Plotters and Cutting Systems
    5. 7

      Air80 vs Stratos70 Windshield

      Im in TX, plenty of of what you mentioned. While I do sit higher in an SUV, glare reduction is not improved much at all with what I have. My 80% is almost clear, not dark at all. With all tint, it adds a bit of reflectivity from the outside, which I notice makes it slightly harder to see from the outside looking in, in the form of a glare not darkness. At the end of the day, it's not permanent, it's only money!
      mikenot in Window Tinting - General Discussion
    6. 0

      PPF installer for hire in SoCAL

      Hello. My name is Adrian i have good experience with paint protection film and i just moved to California, Irvine, i'm open to travel one hour away for the right job. You can contact me at 5717330693
      adrianpaun in Classifieds • Employment • Marketplace
    7. 11

      Boat window tinting tips

      or "bust out another thousand"
      TintDude in Window Tinting - General Discussion
    8. 11

      Boat window tinting tips

      Best tip would be, “Sorry, no boats”.
      pbalentine in Window Tinting - General Discussion
    9. 11

      Boat window tinting tips

      The answer is to not heat that area too much so that you leave some slack in the film for when you get it to the inside. Also cut your pattern a little large so that you can trim a thread off the edges after shrinking to not have a furled edge. After you do a few of those you'll figure out how much to leave/trim to not have any light gaps. Also I'll leave a hardcard wrapped in a microfiber in the bottom overnight to collect water and keep pressure on the film while it dries. Sometimes you can take the top rail off the glass if the jackwagon boat builder didn't put too much pressure on the glass package when it was installed. If you pull the rail off of a tight package it's a pita to get back on, looking like it could crack the whole time. Congrats on getting it done. I've seen plenty that couldn't, which is why I price them like I do.
      Dano in Window Tinting - General Discussion
    10. 11

      Boat window tinting tips

      Thx everyone for the tips the install went fine, however i did run into a new problem on the main curve of the glass from thr outside the tint would lay flat on the big curve but when applying it seemed like there was too much tension and it would not stay down i ended up heating it up and flattening down but some of that area got overheated and warped a little, if you know how to tackle this problem please help me thank you!
      Lauty in Window Tinting - General Discussion
×
×
  • Create New...