Jump to content

Good Deal or What?

Cuttingedge

Recommended Posts

Cuttingedge

Cuttingedge

Posted
Posted

I just won this Surefit Film handler off of ebay for $102.50 (brand new). Has anybody ever heard of this brand? Since I havnt been able to find a new one under $500, I figured this was too good of a deal to pass up. It handles rolls from 36" to 72". I figured I could buy larger rolls and cut as needed to save some money....... Check it out here:

http://i8.ebayimg.com/04/I/000/80/17/9887_1.JPG

Link to comment
Share on other sites
  • Replies 21
  • Created
  • Last Reply
Cuttingedge

Cuttingedge

Posted
  • Author
Posted

Well I finally got the film handler delivered today. Oh and by the way its a SureCut Filmhandler. Still having a hard time locating any info on the web about it. I put it together and it works like a charm and the best part it weighs only about 20lbs Very lightweight. Im not sure if that is good or bad. Best $102 investment I have made in a long time, unless you count that bag of green stuff I bought in high school but that is another story.. :lol2

Check it out: (dog did not come with it)

100_1183.jpg

100_1186.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    autocut-tech

    tinttek

    filmvinyldesigns

    ride wrap

    Lexen

    d2iwindowfilm.com

    tintwiz

    signwarehouse

    martinmetalwork.com

  • Activity Stream

    1. 4

      IR or UV Coating on glass.

      The coating can be removed by "dry scraping" with stainless single edge razor blades, but it is very time consuming and tedious. The coating comes off like a super fine powder. If done correctly there is no damage to the glass and you can tint it just fine after a thorough cleaning. I scraped the drivers door clean after making the mistake of scratching the coating but I did not scrape the passenger side. After tinting you could not tell the difference between the two.
      Bham in Window Tinting - General Discussion
    2. 4

      IR or UV Coating on glass.

      that's not a good choice
      Windsor in Window Tinting - General Discussion
    3. 4

      IR or UV Coating on glass.

      Sure looks like auto glass technology is advancing. I remember the coating on Lexus and some Toyota models could be removed with a glass polish. It took some effort to get to the glass itself and that was an anti-fog coating technology. This IR/UV coating is looking like it is more robust. I wouldn't want to be the one experimenting with whatever product to attempt removal of it. The UV rating is 99%+ reduction, but they limit what they say about IR performance to: Mitigates sense of intense heat on the skin ... Controls rising cabin temperatures. The link is to a company that apparently is deep into providing glass with this coating and they certainly limit info. Take a look for yourself. This appears to be something that could/would expand to more brands/models. It sure is going to put a new slant on selling film and installing film to cars. https://www.cgc-jp.com/products/search_category/automotiveglass/ircut.html
      Tintguy1980 in Window Tinting - General Discussion
    4. 4

      IR or UV Coating on glass.

      We run our hand across the glass since you can feel the coating. Basically, if it does not feel like normal glass, assume it has the coating.
      DynamicATL in Window Tinting - General Discussion
    5. 0

      Independent Contractors needed for Security Film Project- Houston

      We have an immediate need for a couple of installers for a large security film project with DOW located south of Houston. Must be a US citizen and be able to pass a drug and alcohol test. Please contact appliedwindowfilm@gmail.com for more details.
      awft in Classifieds • Employment • Marketplace
    6. 4

      IR or UV Coating on glass.

      I'm sure you are aware of this problem - that Lexus and some other manufacturers decided to install this super sensitive coating to the inside of the glass, that cannot be razor scraped at all. I had one a couple years ago and I had no idea what I was getting into you, and figured it was a one-time deal where the manufacturers realized what a stupid idea it was, & wouldn't do it anymore. Well, a week ago I had a brand new all electric Subaru SUV. It had the exact same thing on the front 2 windows - IR or UV coating that cannot be touched ! Didn't know about it & gouged the coating with my razor blade ... SO ... Does anyone know or have access to some sort of a complete list of these vehicles? I was informed by my sales rep that anyone using the core software from Llumar gets these notes about potential problems with the software - I don't understand why all Llumar dealers don't get the same updates. I was completely unaware of this and it's going to cost me quite a bit of money to fix it because even though I didn't do anything wrong, it did happen at my shop!
      mrsunshades in Window Tinting - General Discussion
    7. 0

      Mutoh Plotter

      Anyone used/using a Mutoh VC-2 plotter for tint? I have one I am using for vinyl and want to buy a second cutter just for tint. I am familiar with the Mutoh and would like to keep my equipment the same if possible. Just looking for some recommendations on how it does. Thanks!
      Hookedup in Plotters and Cutting Systems
    8. 4

      Reveal Molding/Belt Moldings

      I never thought about that. That's a good idea for sure
      Nlaga in Paint Protection Film, Clear Bra Forum
    9. 4

      Reveal Molding/Belt Moldings

      If you have that many, trace a pattern and send it to DAP. They are super quick about scanning and uploading patterns. I have done this with a few custom patterns.
      alberts316 in Paint Protection Film, Clear Bra Forum
    10. 4

      Reveal Molding/Belt Moldings

      For sure great point I will look into that
      Nlaga in Paint Protection Film, Clear Bra Forum
×
×
  • Create New...