Guest elliotbaker Posted February 26, 2008 Report Share Posted February 26, 2008 RYT I HAVE BEEN TINTING A YEAR AND FOUND OUT A FEW THINGS I DUNO IF ANY OF YOU KNOW THESE TIPS 1.CUTING THE RUBBERS SO NO LIGHT GAPS(BIT OBVIOUS) 2.SANDING DOWN THE DOT MATRIX SO NO WATER CAN GET STCK USING A VERY FINE PEICE OF SANDING PAPER ( GREAT OUT COME ) 3.GET NO TOLKEN POWEDER ON THE CARS GET A SHEET OF BOUNCE CLOTH WET AND WIPE IT ON CAR WAIT FOR DRY THEN SHRINK AS USUALI FOR DRY SHRINK 4.USE RAPIDTAC ( STRONGEST ONE) ALSO TO GET RID OF THE BEST OF THE DOTS ON THE DOT MATRIX 5.IF YOU DECIDE TO DO WET SHRINK USE MR SHINE POLISE ON THE OUTSIDES OF THE TINT AND SOPY WATER IN THE MIDDLE 6.USING THAT BLAKC SILOCONE STUFF TO COVER UP LIGHT GAPS IF U MUST NEED SOME TAKES SUM EXPERIENCE OF USING IT THOS SO U DONT MAKE IT LOOK SHIRT HAHA DNO IF U ALL ALREDI KNEW ALL THAT JUST FORT I WUD LET U KNW! .... and luking for a job atm! haha baker_1989-2005@hotmail.co.uk just email me directly if u got any questions becuase ill probly never go on this again Link to comment Share on other sites More sharing options...
TTS Posted February 26, 2008 Report Share Posted February 26, 2008 Elliot, You can turn off your capitol lock! It comes across as if you are yelling.... and trust me... We can all hear you fine... Good Energy! Link to comment Share on other sites More sharing options...
TINTZEUS Posted February 26, 2008 Report Share Posted February 26, 2008 Link to comment Share on other sites More sharing options...
Guest zolar Posted February 26, 2008 Report Share Posted February 26, 2008 don't cut your rubbers and welcome Link to comment Share on other sites More sharing options...
Guest tintgod Posted February 26, 2008 Report Share Posted February 26, 2008 don't cut your rubbers and welcome Link to comment Share on other sites More sharing options...
Slick Posted February 26, 2008 Report Share Posted February 26, 2008 :DD Link to comment Share on other sites More sharing options...
Guest gtotint Posted February 26, 2008 Report Share Posted February 26, 2008 Link to comment Share on other sites More sharing options...
TintWizard Posted February 26, 2008 Report Share Posted February 26, 2008 Good one! ..and welcome Link to comment Share on other sites More sharing options...
Guest CajunTinter Posted February 27, 2008 Report Share Posted February 27, 2008 :hmmm Link to comment Share on other sites More sharing options...
Guest Crackz Posted February 27, 2008 Report Share Posted February 27, 2008 welcome to the board Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.