suntek problems

[Guest unique.tinting]

hi everyone wondering if anyone uses the carbon series film having problems when windind the window down from the top seal leaving a hazy appearence like the glue has melted this hapens in 3 weeks after application hopfully a bad batch though I have tinted over 800 cars in this film over the last 4 months. thank you

[Guest naughtydog]

I use carbon - never had that problem as of yet.

I heard something about 3m films doing this

[Guest unique.tinting]

yep its doing the same as the colour stable film from 3m just cant figure it out

[Guest mhun9180]

The sample roll I had did it too :gayfight

[Texastintchick]

I use it, never had a problem.

[Guest unique.tinting]

I use it, never had a problem.

the film looks awesome but when you wind the window down 10mm from the edge of the glass the addheasive looks like it has gone all hazy

[Texastintchick]

I use it, never had a problem.

the film looks awesome but when you wind the window down 10mm from the edge of the glass the addheasive looks like it has gone all hazy

Are you sure you are not using died I mean I know you probably know what you are using but I have seen that with thier died film.

[Guest unique.tinting]

I use it, never had a problem.

it says carbon the rep is coming out to see me today I will get more info and post it tonight if cant be fixed will have to change back film company to much hassle

[micro-edge]

Haven't had that problem with any of suntek's films yet. Have seen it on mmm cs though.

[big money]

No problem here with it, at least none have complained, and I haven't seen it, yet