Jump to content

compustar 2wfmas CM3000


Guest *Matt *

Recommended Posts

Guest *Matt *

I have 2wfm installed about 4 years ago. today, I took a trip out of town when I got back the compustar did not response to my remote. I then tried to reprogram the compustar with the turning on/off and that didn't work. I have tried with the backup remote without the LCD display and that failed to work. the valet mode to turn on/off (I+III) and that didn't work.

I have probed with a DMM on the CM300 red(+), red/white and black(-) wires. all 3 wires show connectivity. I pulled out the hardness and plug it back after the probing but I did not probe from the hardness. should I have probe from the hardness? because there is no respond from the alarm I did not probe anywhere else. I don't know how to probe the antenna. does anyone know how? I have already pulled out the antenna hardness and replug it back-in in both sides.

I have pulled out the 2 fuses 30 and 10 or 15. both seems to be intact. both fuses don't have fuse number on it but it is 1 red and 1 green. what is the next step to troubleshoot this alarm. thanks.

Link to comment
Share on other sites

it might be a bad brain. Good thing they have a lifetime warranty on them.

Just make sure you did the turn the key on and off 5 times and on the 5th time leave the key on and hit lock wait till stuff clicks and flashes if the park lights are hooked up then turn the key off.

I installed and own several compustars when installed right you rarely have problems.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  •   Sponsored by
    tinttek

    filmvinyldesigns

    The Tint Tutor

    ride wrap

    Lexen

    Tint My Ride

    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

    rewiredtech.io

  • Activity Stream

    1. 0

      Graphtec Plotter

    2. 0

      FOR SALE Jaguar V LX 40" plotter

    3. 1

      Llumar air 80 vs 3m Crystalline - dealer advised to go regular 3m ceramic over Crystalline

    4. 1

      Llumar air 80 vs 3m Crystalline - dealer advised to go regular 3m ceramic over Crystalline

    5. 1

      Beginner trying to learn, where I'm at...

    6. 4,178

      What did you tint today?

    7. 1

      Beginner trying to learn, where I'm at...

    8. 4

      Xpel; rookie (me) popped air pocket and nicked paint

    9. 4

      Xpel; rookie (me) popped air pocket and nicked paint

×
×
  • Create New...