Jump to content

problems with compustar 2000as


Guest Crystalwhitesvt

Recommended Posts

Guest Crystalwhitesvt

While waiting for a new remote from compustar. (I do not have a factory key fob and my keys will only unlock my passenger door). My doors got locked and upon unlocking them it set , my factory theft system off. The only way I could get the car started was to pull one of battery cables to reset the factory theft system. Once I received my replacement remote from Compustar and tried programming it by cycling between the on/off ac position 5 times and get one blink from the parking lights. After I got the one blink I then pushed the lock/unlock button one time and nothing would happen and then a couple seconds later the parking lights would blink twice to exit the programming mode. I tried this numerous times all with the same result. After checking some other functions, I found that nothing is working, IE reservation mode for autostart and so on. I checked all fuses and everything seems fine but none of the features are working and I cannot program my remote. Is there a way to reset the Compustar alarm through the Control Module and if so where would I find it. I don't want to have to take it into a Compustar authorized dealer and pay for an hours worth of tech time to find out it something that I could have done. The car is a Ford Mustang, and any input would be greatly appreciated. Thanks

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  •   Sponsored by
    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

    rewiredtech.io

    tinttek

    filmvinyldesigns

    The Tint Tutor

    ride wrap

    Lexen

    Tint My Ride

  • Activity Stream

    1. 2

      The direction of shrink

    2. 0

      NOW HIRING: Experienced Automotive Tint/Vinyl Wrap Installer

    3. 2

      The direction of shrink

    4. 2

      The direction of shrink

    5. 1

      Graphtec Plotter

    6. 2

      Llumar air 80 vs 3m Crystalline - dealer advised to go regular 3m ceramic over Crystalline

    7. 1

      Graphtec Plotter

    8. 0

      FOR SALE Jaguar V LX 40" plotter

    9. 2

      Llumar air 80 vs 3m Crystalline - dealer advised to go regular 3m ceramic over Crystalline

    10. 2

      Llumar air 80 vs 3m Crystalline - dealer advised to go regular 3m ceramic over Crystalline

×
×
  • Create New...