Jump to content

easier back window


Guest Crackz

Recommended Posts

I started turning on the rear defroster for every car this winter it make the shrink alot better and less peanuts... and the paper shrinks alot better than popping like on a cold glass much more manageable in my opinion ... just thought I share this big joe

my step is clean all exterior glass powder rear lay out rear turn on defrost...cut out sides shrink sides and shrink the rear works well

Link to comment
Share on other sites

I have heard this helps however I haven't turned them on during installation but told customers to while they are driving afterwards.

I have also been turning them on when I have a removal before I put steam to the film. Don't know if this helps or not as with the steamer it seems to work well anyway. Any thoughts on if it helps removal as well or am I possibly making it more difficult on myself?

Link to comment
Share on other sites

Guest thatsnappyguy

some adhesives leave too much glue when theres alot of heat. it helps sometimes but not always...like I said, depends on the film brand and what stage of shittyness its in.

Link to comment
Share on other sites

I have also been turning them on when I have a removal before I put steam to the film. Don't know if this helps or not as with the steamer it seems to work well anyway. Any thoughts on if it helps removal as well or am I possibly making it more difficult on myself?

I tried that. Turning the desfrost before removal and it didnt help anything lol

try very hot water and deep in it a towel that can cover the whole back glass. lay it down. also spray and put the black garbage bag inside to create moisture. that way almost all the glue comes off.

its helpful when it is no sunny/hot outside

Link to comment
Share on other sites

Water and electricity dont mix. often wondered why some of my custy's would say the last time I had a car tinted the defroster quit working soon after. :thumb

water and ac current dont mix.... it doesnt bother 12 volts :thumb now I have to ask are you from cow poker ville :beer :beer :bs well I guess florida can be cow poker or cow tipper ville :lol2

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  •   Sponsored by
    tinttek

    filmvinyldesigns

    ride wrap

    Conco

    Lexen

    tintwiz

    signwarehouse

    martinmetalwork.com

  • Activity Stream

    1. 3

      Peanut Killer

    2. 3

      Peanut Killer

    3. 1

      OG tinter

    4. 1

      OG tinter

    5. 3

      Peanut Killer

    6. 0

      Join Our Team at Tint My Ride – Denver's Premier Window Tinting and PPF Specialists!

    7. 6

      Tack Solution When Vinyl won't lay flat

    8. 6

      Tack Solution When Vinyl won't lay flat

    9. 6

      Tack Solution When Vinyl won't lay flat

    10. 3

      Peanut Killer

×
×
  • Create New...