Chrysler 300 rear deck

[uncle bob]

Morning all

Have a 300c to do today, 1st one, if I need to remove the rear deck any tips guys

Uncle Bob

[tintmor]

Morning all

Have a 300c to do today, 1st one, if I need to remove the rear deck any tips guys

Uncle Bob

Easy car no need to remove anything. Good luck

[Slick]

Not sure if the 300 is different over there, but I have found most here have the brake light very close to the glass, so I remove most of them. The instructions are here in the makes and models section on how to do it.

[Sdtintdude]

I did a 2009 and it had no thrid brake light, so there was no need for me to remove the rear deck

[Guest scottydosnntkno]

I did a 2009 and it had no thrid brake light, so there was no need for me to remove the rear deck

:inot if its BRAND new then you don' thave to do anything. on the older ones, you can do it with a bulldozer, but it makes it a lot cleaner and less chance of a messup if you take the 10 minutes and pull/reinstall the deck.

fold the seats down, two bolts on the side bolsters. Use a putty knife and push down from the top of the bolsters on the big clips, they take a lot of force, you won't break it. Then pull those out, and slide the rear deck forward over the top of the back seats, tint, and reverse install.

[TintWizard]

Do a search, I made some notes along with pics if it's the older style :inot

[uncle bob]

Thanks guys

06 model with b/light, removed deck for ease of installing rear screen.

Thanks again to all who replied

Bob