Kicking off the season

[Guest Lee]

hence my desire to fix the "speck" issue

[Guest Scottsfire]

I've got peel boards, damn near surgical install room and using 99% of your suggestions BUT still getting the clear specks. Thought it was my yellow tube squeegy, but used my new blue max today.......no difference, still have the specks. Filter water, distilled water etc etc.....still clear sand contaminates. NOTE: I have determined that where I "was" touching the film, that area almost always had contaminates. I'm in the same boat......... Oh and I'm using Suntek Carbon....soooooo.....I am clueless of what could be my problem

[TINT]

freakin rookies

[Booms]

freakin rookies

[Guest Lee]

freakin rookies

Gotta start somewhere chief.

[Guest scottydosnntkno]

[Balzyone]

usually I peel the liner, while spraying the slip solution, then walk around the door, spray the glass, reach over the frame and lift the film around and install it.

den u squeegee it and roll up dat winder ehh.

[Guest Lee]

yeah the peel board fixed the problem

[msheurs]

yeah the peel board fixed the problem

nice

[Guest Lee]

thanks for the help guys!! Sometimes the rookies need some help, I'm sure no one plopped out of their mama with an olfa knife and a roll of tint and said, "Where's the car?", except maybe Booms