mustangdroptop96 Posted April 14, 2010 Report Share Posted April 14, 2010 So about a week ago I tinted a 06 Grand Prix, when I put the back window on the film would NOT stick for the life of me in little spots along the defrost line, there is no dust or contamination in these spots and usually I Just turn on the defroster and it dries them right up, except his defroster didnt work. So I told him after 20 minutes of trying to push them out and them popping up, to just bring the car back in a week once it dried up and I'd mess with it some more. Well, car is back at my shop I tried heating them up from the outside and pushing them out and they stay down and pop right back up, he said it doesnt bother him but it really bothers me. I've never seen anything like it, I tried a relief cut on one of them along the defrost but it didnt help. Any ideas or should I just redo it and be a good tinter ;) Link to comment Share on other sites More sharing options...
mustangdroptop96 Posted April 14, 2010 Author Report Share Posted April 14, 2010 for some reason I can't post images, I tried again, did this work? Link to comment Share on other sites More sharing options...
TintDude Posted April 14, 2010 Report Share Posted April 14, 2010 for some reason I can't post images, I tried again, did this work? Please don't attach images, use a hosting service like photobucket instead. Link to comment Share on other sites More sharing options...
mustangdroptop96 Posted April 14, 2010 Author Report Share Posted April 14, 2010 Sorry! I've never posted an image, I will do that in the future. Do you have any pointers on this or have you ever seen anything like it? Link to comment Share on other sites More sharing options...
Guest scottydosnntkno Posted April 14, 2010 Report Share Posted April 14, 2010 if I ever get a spot like that, I just make a little knick in the end on the defroster line, push it down really hard, and its done what kinda film? Link to comment Share on other sites More sharing options...
mustangdroptop96 Posted April 14, 2010 Author Report Share Posted April 14, 2010 I'm using Suntek Std 5%. I almost never put limo on cars and I know with Suntek, the 5% they used is a thicker ply. I tried a small slit on the defroster right where the bubble is but no luck, usually u can push these things out no problem once it dries a bit. Link to comment Share on other sites More sharing options...
Guest Suncs Posted April 14, 2010 Report Share Posted April 14, 2010 Id Redo. give it a quick shot of isopropoline (alcohol) see if that works Link to comment Share on other sites More sharing options...
mustangdroptop96 Posted April 14, 2010 Author Report Share Posted April 14, 2010 Yeah like I said I've never seen anything like it, he actually brought it back so I could vinyl the top defrost line and I've been messing with the little bubbles, but he said it doesnt bother him. He said the car looks perfect. Link to comment Share on other sites More sharing options...
Guest Suncs Posted April 14, 2010 Report Share Posted April 14, 2010 then give it back Link to comment Share on other sites More sharing options...
TomTint Posted April 14, 2010 Report Share Posted April 14, 2010 Looks like it is popping up where it was shrunk. Sounds simple, but use less slip next time ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.