2010 Dodge Challenger, any tips?

[LB55]

Did an art 8 challenger today. What a nice car damn!

Anyways the backwindow was easy. I used 000 steel wool and used rubbing alcohol to clean it. Came out good.

[LB55]

[tint-factory clearbra]

Nice looking Challenger. Any more pics of the inside of the shop?

[LB55]

lol. come by the shop.

[dmiller403]

I geuse I was a lucky one with thinner defrost lines. I had a total of one pucker from the side. I geuse that would be weird being that the back window is about 18" high. was the quickest shrink on a back glass. and the rest was cake too.

did a tint strip too and even that was simple with no dot matrix. (I advised not to put one on. but custy gets what he wants)

one thing to add would be to watch out on the side windows like many other frameless. they shift upward when closed. if you look at the top edge seal there are actually seams that can pull the film back when you close the door and the window goes up into the seal. my problem was on the corner or the large side window.

[Shadebyblade]

This works for me once I dry shrink and clean the back glass . Ill put the film on the glass then ill pull the tint back and spray just water washing the soap out then turn on defroster and streach the film while pushing the water out!

[Ridler]

For anyone that wants to know. Here is the rear brake light taken out. Just in case you want to take it out without having to tuck it under. It takes about 10 seconds and it's worth it in my opinion.

 

Here's the finished product:

[NvrLate]

[NvrLate]

Nice work, man. Thanks for the tip on the brake light, I wanted to refresh my memory for tomorrow. I did remember something about clips wanting to stay in the roof.